1、按教程上的步骤来烧写superboot，我是WIN7的系统（本来是用XP的，为了烧写，活生生的换了win7
）
2、烧写很顺利，都提示成功了
3、好的，我把Android系统镜像和FriendlyARM.ini都复制到images目录下
4、把启动开关拨到sdboot，打开电源
于是一直白屏~~~~~~·
串口返回一条“board type 2”这条信息后，再也没下文
配置文件如下
#This line cannot be removed. by FriendlyARM(
www.arm9.net)
CheckOneButton=No
Action = Install
OS = Android
LCD-Mode = No
LCD-Type = S70
LowFormat = No
VerifyNandWrite = No
CheckCRC32=No
StatusType = Beeper | LED
################### Android 4.0.3 ####################
Android-BootLoader = Superboot210.bin
Android-Kernel = Android/zImage
Android-CommandLine = root=/dev/mtdblock4 rootfstype=yaffs2 console=ttySAC0,115200 init=/linuxrc androidboot.console=ttySAC0
Android-RootFs-InstallImage = Android/rootfs_android-mlc2.img
################### Android 2.3.1 ####################
#Android-BootLoader = Superboot210.bin
#Android-Kernel = Android2.3.1/zImage
#Android-CommandLine = root=/dev/mtdblock4 rootfstype=yaffs2 console=ttySAC0,115200 init=/linuxrc androidboot.console=s3c2410_serial0
#Android-RootFs-InstallImage = Android2.3.1/rootfs_android-mlc2.img
################### Linux ####################
Linux-BootLoader = Superboot210.bin
Linux-Kernel = Linux/zImage
Linux-CommandLine = root=/dev/mtdblock4 rootfstype=yaffs2 console=ttySAC0,115200 init=/linuxrc
Linux-RootFs-InstallImage = Linux/rootfs_qtopia_qt4-mlc2.img
################### Windows CE6.0 ####################
WindowsCE6-Bootloader = Superboot210.bin
WindowsCE6-BootLogo = WindowsCE6\bootlogo.bmp
WindowsCE6-InstallImage = WindowsCE6\NK.bin
WindowsCE6-RunImage = WindowsCE6\NK.bin
我还要去买第5张卡么？
客服电话又关机~~~·
都三天了，郁闷郁闷。
求救
