主题 : NanoPc-T4 官方openwrt 固件 io 出错文件系统变read-only 复制链接 | 浏览器收藏 | 打印
级别: 新手上路
UID: 147742
精华: 0
发帖: 4
金钱: 20 两
威望: 4 点
贡献值: 0 点
综合积分: 8 分
注册时间: 2022-07-28
最后登录: 2022-08-04
楼主  发表于: 20天前

 NanoPc-T4 官方openwrt 固件 io 出错文件系统变read-only

NanoPc-T4线刷的rk3399-usb-friendlywrt-22.03-docker-20220712固件,经常IO然后文件系统变成只读的,换了几块板子都这样,应该是固件问题。之前用19版本的friendlywrt固件时没有这个IO问题,但是防火墙在接口状态变化时会清空规则导致无法上网,22版本这个问题解决了没想到又有新的问题。
文件系统刚开机是正常可以读写的,只要进行一些写入操作就很容易出现上面的问题。最简单的复现方法是拉取一个docker镜相,基本上前面下载是正常的,然后会突然报错说文件系统是read-only的,这时查看内核日志就会发现io出错,mmcblk2p9被remount成read-only了。

这是出问题地方的内核日志
[   81.298159] blk_update_request: I/O error, dev mmcblk2, sector 1511472 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 0[   81.299178] Buffer I/O error on dev mmcblk2p9, logical block 518, lost sync page write[   81.299942] EXT4-fs error (device mmcblk2p9): ext4_check_bdev_write_error:218: comm exe: Error while async write back metadata[   81.301026] Aborting journal on device mmcblk2p9-8.[   81.301512] EXT4-fs error (device mmcblk2p9): ext4_journal_check_start:83: comm dockerd: Detected aborted journal[   81.301523] EXT4-fs error (device mmcblk2p9): ext4_journal_check_start:83: comm dockerd: Detected aborted journal[   81.302634] blk_update_request: I/O error, dev mmcblk2, sector 1512496 op 0x1:(WRITE) flags 0x800 phys_seg 59 prio class 0[   81.304056] EXT4-fs (mmcblk2p9): Remounting filesystem read-only[   81.304129] EXT4-fs (mmcblk2p9): Remounting filesystem read-only[   81.304141] EXT4-fs error (device mmcblk2p9) in __ext4_new_inode:1136: Journal has aborted


下面是完整的日志
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034][    0.000000] Linux version 5.15.53 (ubuntu@f1d0513089c1) (aarch64-linux-gnu-gcc (ctng-1.23.0-150g-FA) 6.4.0, GNU ld (ctng-1.23.0-150g-FA) 2.28) #1 SMP PREEMPT Tue Jul 12 13:18:16 CST 2022[    0.000000] Machine model: FriendlyElec NanoPC-T4[    0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')[    0.000000] printk: bootconsole [uart8250] enabled[    0.000000] efi: UEFI not found.[    0.000000] Zone ranges:[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000f7ffffff][    0.000000]   DMA32    empty[    0.000000]   Normal   empty[    0.000000] Movable zone start for each node[    0.000000] Early memory node ranges[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000083fffff][    0.000000]   node   0: [mem 0x000000000a200000-0x00000000f7ffffff][    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff][    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges[    0.000000] On node 0, zone DMA: 7680 pages in unavailable ranges[    0.000000] cma: Reserved 16 MiB at 0x00000000f2800000[    0.000000] psci: probing for conduit method from DT.[    0.000000] psci: PSCIv1.0 detected in firmware.[    0.000000] psci: Using standard PSCI v0.2 function IDs[    0.000000] psci: Trusted OS migration not required[    0.000000] psci: SMC Calling Convention v1.0[    0.000000] percpu: Embedded 28 pages/cpu s75624 r8192 d30872 u114688[    0.000000] pcpu-alloc: s75624 r8192 d30872 u114688 alloc=28*4096[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [    0.000000] Detected VIPT I-cache on CPU0[    0.000000] CPU features: detected: GIC system register CPU interface[    0.000000] CPU features: detected: ARM erratum 845719[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 991752[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.dtbo_idx=0 swiotlb=1 coherent_pool=1m rw console=ttyS2,1500000 earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk2p8 rootfstype=ext4 data=/dev/mmcblk2p9 consoleblank=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1[    0.000000] Unknown kernel command line parameters "storagemedia=emmc data=/dev/mmcblk2p9 cgroup_enable=memory cgroup_memory=1", will be passed to user space.[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off[    0.000000] Memory: 3895368K/4030464K available (14528K kernel code, 2764K rwdata, 4756K rodata, 9728K init, 799K bss, 118712K reserved, 16384K cma-reserved)[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1[    0.000000] ftrace: allocating 48141 entries in 189 pages[    0.000000] ftrace: allocated 189 pages with 6 groups[    0.000000] trace event string verifier disabled[    0.000000] rcu: Preemptible hierarchical RCU implementation.[    0.000000] rcu:  RCU event tracing is enabled.[    0.000000] rcu:  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.[    0.000000]  Trampoline variant of Tasks RCU enabled.[    0.000000]  Rude variant of Tasks RCU enabled.[    0.000000]  Tracing variant of Tasks RCU enabled.[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode[    0.000000] GICv3: 256 SPIs implemented[    0.000000] GICv3: 0 Extended SPIs implemented[    0.000000] GICv3: Distributor has no Range Selector support[    0.000000] Root IRQ handler: gic_handle_irq[    0.000000] GICv3: 16 PPIs implemented[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000[    0.000000] ITS [mem 0xfee20000-0xfee3ffff][    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @2600000 (flat, esz 8, psz 64K, shr 0)[    0.000000] ITS: using cache flushing for cmd queue[    0.000000] GICv3: using LPI property table @0x0000000002590000[    0.000000] GIC: using cache flushing for LPI property table[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000025a0000[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns[    0.001878] Console: colour dummy device 80x25[    0.002381] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)[    0.003328] pid_max: default: 32768 minimum: 301[    0.003866] LSM: Security Framework initializing[    0.004420] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)[    0.005123] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)[    0.008954] rcu: Hierarchical SRCU implementation.[    0.010285] Platform MSI: interrupt-controller@fee20000 domain created[    0.011378] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created[    0.012391] EFI services will not be available.[    0.013583] smp: Bringing up secondary CPUs ...[    0.014872] Detected VIPT I-cache on CPU1[    0.014916] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000[    0.014936] GICv3: CPU1: using allocated LPI pending table @0x00000000025b0000[    0.014999] CPU1: Booted secondary processor 0x0000000001 [0x410fd034][    0.015924] Detected VIPT I-cache on CPU2[    0.015958] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000[    0.015975] GICv3: CPU2: using allocated LPI pending table @0x00000000025c0000[    0.016017] CPU2: Booted secondary processor 0x0000000002 [0x410fd034][    0.016903] Detected VIPT I-cache on CPU3[    0.016933] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000[    0.016949] GICv3: CPU3: using allocated LPI pending table @0x00000000025d0000[    0.016989] CPU3: Booted secondary processor 0x0000000003 [0x410fd034][    0.017863] CPU features: detected: Spectre-v2[    0.017874] CPU features: detected: Spectre-v4[    0.017878] CPU features: detected: Spectre-BHB[    0.017885] CPU features: detected: ARM errata 1165522, 1319367, or 1530923[    0.017890] Detected PIPT I-cache on CPU4[    0.017919] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000[    0.017935] GICv3: CPU4: using allocated LPI pending table @0x00000000025e0000[    0.017975] CPU4: Booted secondary processor 0x0000000100 [0x410fd082][    0.018869] Detected PIPT I-cache on CPU5[    0.018896] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000[    0.018911] GICv3: CPU5: using allocated LPI pending table @0x00000000025f0000[    0.018942] CPU5: Booted secondary processor 0x0000000101 [0x410fd082][    0.019138] smp: Brought up 1 node, 6 CPUs[    0.032679] SMP: Total of 6 processors activated.[    0.033117] CPU features: detected: 32-bit EL0 Support[    0.033592] CPU features: detected: CRC32 instructions[    0.056067] CPU: All CPU(s) started at EL2[    0.056508] alternatives: patching kernel code[    0.059119] devtmpfs: initialized[    0.070258] Registered cp15_barrier emulation handler[    0.070762] Registered setend emulation handler[    0.071354] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns[    0.072300] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)[    0.073481] pinctrl core: initialized pinctrl subsystem[    0.074500] DMI not present or invalid.[    0.075540] NET: Registered PF_NETLINK/PF_ROUTE protocol family[    0.078534] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations[    0.079581] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations[    0.080869] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations[    0.081697] audit: initializing netlink subsys (disabled)[    0.082401] audit: type=2000 audit(0.080:1): state=initialized audit_enabled=0 res=1[    0.083274] thermal_sys: Registered thermal governor 'fair_share'[    0.083283] thermal_sys: Registered thermal governor 'step_wise'[    0.084349] cpuidle: using governor ladder[    0.085337] cpuidle: using governor menu[    0.085987] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.[    0.086836] ASID allocator initialised with 65536 entries[    0.110201] platform ff770000.syscon:phy@f780: Fixing up cyclic dependency with fe330000.mmc[    0.116350] platform ff940000.hdmi: Fixing up cyclic dependency with ff8f0000.vop[    0.117121] platform ff940000.hdmi: Fixing up cyclic dependency with ff900000.vop[    0.126359] rockchip-gpio ff720000.gpio0: probed /pinctrl/gpio0@ff720000[    0.127708] rockchip-gpio ff730000.gpio1: probed /pinctrl/gpio1@ff730000[    0.129030] rockchip-gpio ff780000.gpio2: probed /pinctrl/gpio2@ff780000[    0.130292] rockchip-gpio ff788000.gpio3: probed /pinctrl/gpio3@ff788000[    0.131519] rockchip-gpio ff790000.gpio4: probed /pinctrl/gpio4@ff790000[    0.147947] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages[    0.148596] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages[    0.149238] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages[    0.149881] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages[    0.152556] cryptd: max_cpu_qlen set to 1000[    0.160770] iommu: Default domain type: Translated [    0.161246] iommu: DMA domain TLB invalidation policy: strict mode [    0.164499] SCSI subsystem initialized[    0.165062] libata version 3.00 loaded.[    0.165212] usbcore: registered new interface driver usbfs[    0.165773] usbcore: registered new interface driver hub[    0.166312] usbcore: registered new device driver usb[    0.166845] mc: Linux media interface: v0.10[    0.167293] videodev: Linux video capture interface: v2.00[    0.167854] pps_core: LinuxPPS API ver. 1 registered[    0.168333] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>[    0.169216] PTP clock support registered[    0.170269] Advanced Linux Sound Architecture Driver Initialized.[    0.171424] Bluetooth: Core ver 2.22[    0.171797] NET: Registered PF_BLUETOOTH protocol family[    0.172306] Bluetooth: HCI device and connection manager initialized[    0.172919] Bluetooth: HCI socket layer initialized[    0.173392] Bluetooth: L2CAP socket layer initialized[    0.173887] Bluetooth: SCO socket layer initialized[    0.174366] NetLabel: Initializing[    0.174693] NetLabel:  domain hash size = 128[    0.175110] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO[    0.175714] NetLabel:  unlabeled traffic allowed by default[    0.176906] clocksource: Switched to clocksource arch_sys_counter[    0.222332] VFS: Disk quotas dquot_6.6.0[    0.222768] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[    0.223561] FS-Cache: Loaded[    0.232774] NET: Registered PF_INET protocol family[    0.233533] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)[    0.236779] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 81920 bytes, linear)[    0.237683] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)[    0.238433] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)[    0.239447] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)[    0.240885] TCP: Hash tables configured (established 32768 bind 32768)[    0.241729] UDP hash table entries: 2048 (order: 5, 196608 bytes, linear)[    0.242543] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes, linear)[    0.243586] NET: Registered PF_UNIX/PF_LOCAL protocol family[    0.244731] RPC: Registered named UNIX socket transport module.[    0.245323] RPC: Registered udp transport module.[    0.245776] RPC: Registered tcp transport module.[    0.246229] RPC: Registered tcp NFSv4.1 backchannel transport module.[    0.246851] PCI: CLS 0 bytes, default 64[    0.247531] Trying to unpack rootfs image as initramfs...[    0.257604] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available[    0.258750] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available[    0.613576] Freeing initrd memory: 7308K[    0.800526] Initialise system trusted keyrings[    0.801271] workingset: timestamp_bits=46 max_order=20 bucket_order=0[    0.808237] squashfs: version 4.0 (2009/01/31) Phillip Lougher[    0.809162] FS-Cache: Netfs 'nfs' registered for caching[    0.810097] NFS: Registering the id_resolver key type[    0.810610] Key type id_resolver registered[    0.811013] Key type id_legacy registered[    0.811469] nfs4filelayout_init: NFSv4 File Layout Driver Registering...[    0.812119] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...[    0.813033] fuse: init (API version 7.34)[    0.861037] Key type asymmetric registered[    0.861433] Asymmetric key parser 'x509' registered[    0.862019] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)[    0.862869] io scheduler mq-deadline registered[    0.863311] io scheduler kyber registered[    0.866352] rockchip-usb2phy ff770000.syscon:usb2phy@e450: failed to create phy[    0.867805] rockchip-usb2phy ff770000.syscon:usb2phy@e460: failed to create phy[    0.874416] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330[    0.875147] dma-pl330 ff6d0000.dma-controller:  DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12[    0.877279] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330[    0.878008] dma-pl330 ff6e0000.dma-controller:  DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16[    0.879429] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled[    0.881745] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 43, base_baud = 1500000) is a 16550A[    0.883609] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 44, base_baud = 1500000) is a 16550A[    0.884593] printk: console [ttyS2] enabled[    0.885389] printk: bootconsole [uart8250] disabled[    0.888811] random: crng init done[    0.889050] rockchip-vop ff8f0000.vop: Adding to iommu group 2[    0.890251] rockchip-vop ff900000.vop: Adding to iommu group 3[    0.897087] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffffc008f17b38)[    0.897864] [drm] unsupported AFBC format[3231564e][    0.900044] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffffc008f17b38)[    0.903938] cacheinfo: Unable to detect cache hierarchy for CPU 0[    0.908612] brd: module loaded[    0.916226] loop: module loaded[    0.919584] PPP generic driver version 2.4.2[    0.920143] usbcore: registered new interface driver asix[    0.920657] usbcore: registered new interface driver ax88179_178a[    0.921240] usbcore: registered new interface driver cdc_ether[    0.921780] usbcore: registered new interface driver qmi_wwan[    0.925566] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[    0.926164] ehci-pci: EHCI PCI platform driver[    0.926593] ehci-platform: EHCI generic platform driver[    0.927311] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[    0.927864] ohci-platform: OHCI generic platform driver[    0.929042] usbcore: registered new interface driver cdc_acm[    0.929541] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters[    0.930265] usbcore: registered new interface driver cdc_wdm[    0.930940] usbcore: registered new interface driver uas[    0.931445] usbcore: registered new interface driver usb-storage[    0.932039] usbcore: registered new interface driver usbserial_generic[    0.932627] usbserial: USB Serial support registered for generic[    0.933196] usbcore: registered new interface driver ch341[    0.933693] usbserial: USB Serial support registered for ch341-uart[    0.934262] usbcore: registered new interface driver cp210x[    0.934766] usbserial: USB Serial support registered for cp210x[    0.935308] usbcore: registered new interface driver ftdi_sio[    0.935827] usbserial: USB Serial support registered for FTDI USB Serial Device[    0.936492] usbcore: registered new interface driver option[    0.937013] usbserial: USB Serial support registered for GSM modem (1-port)[    0.937644] usbcore: registered new interface driver pl2303[    0.938147] usbserial: USB Serial support registered for pl2303[    0.938691] usbcore: registered new interface driver qcserial[    0.939210] usbserial: USB Serial support registered for Qualcomm USB modem[    0.940173] mousedev: PS/2 mouse device common for all mice[    0.941492] i2c_dev: i2c /dev entries driver[    0.948085] IR NEC protocol handler initialized[    0.948948] rockchip-rga ff680000.rga: HW Version: 0x03.02[    0.949681] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0[    0.953720] dw_wdt ff848000.watchdog: No valid TOPs array specified[    0.954762] device-mapper: uevent: version 1.0.3[    0.955401] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com[    0.958174] sdhci: Secure Digital Host Controller Interface driver[    0.958721] sdhci: Copyright(c) Pierre Ossman[    0.959105] Synopsys Designware Multimedia Card Interface Driver[    0.960173] sdhci-pltfm: SDHCI platform and OF driver helper[    0.960421] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.[    0.961329] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.[    0.961919] dwmmc_rockchip fe310000.mmc: Version ID is 270a[    0.962461] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo[    0.963330] ledtrig-cpu: registered to indicate activity on CPUs[    0.964536] hid: raw HID events driver (C) Jiri Kosina[    0.965403] usbcore: registered new interface driver usbhid[    0.965899] usbhid: USB HID core driver[    0.971431] Initializing XFRM netlink socket[    0.972159] NET: Registered PF_INET6 protocol family[    0.973533] Segment Routing with IPv6[    0.973880] In-situ OAM (IOAM) with IPv6[    0.984271] bpfilter: Loaded bpfilter_umh pid 169[    0.985209] NET: Registered PF_PACKET protocol family[    0.986168] Bluetooth: RFCOMM TTY layer initialized[    0.986611] Bluetooth: RFCOMM socket layer initialized[    0.987086] Bluetooth: RFCOMM ver 1.11[    0.987427] Bluetooth: HIDP (Human Interface Emulation) ver 1.2[    0.987953] Bluetooth: HIDP socket layer initialized[    0.988449] Key type dns_resolver registered[    0.988471] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA[    0.990338] registered taskstats version 1[    0.990713] Loading compiled-in X.509 certificates[    0.991905] Key type ._fscrypt registered[    0.992264] Key type .fscrypt registered[    0.992612] Key type fscrypt-provisioning registered[    1.031159] friendlyelec-board board: Serial : 38d19e4d47a7cab8[    1.032213] vcc3v3_sys: supplied by vcc12v0_sys[    1.033038] vcc5v0_sys: supplied by vcc12v0_sys[    1.033878] vcc3v0_sd: supplied by vcc3v3_sys[    1.034803] vbus_typec: supplied by vcc5v0_sys[    1.035394] vcc5v0_host0: supplied by vcc5v0_sys[    1.045427] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffffc008f17b38)[    1.047998] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffffc008f17b38)[    1.048911] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)[    1.051774] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffffc008f1bb10)[    1.053807] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes[    1.055359] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0[    1.062508] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller[    1.063012] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1[    1.063806] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000080002030010[    1.064650] xhci-hcd xhci-hcd.3.auto: irq 73, io mem 0xfe800000[    1.064713] mmc2: new HS400 Enhanced strobe MMC card at address 0001[    1.065559] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15[    1.066502] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.066675] mmcblk2: mmc2:0001 AJTD4R 14.6 GiB [    1.067138] usb usb1: Product: xHCI Host Controller[    1.067963] usb usb1: Manufacturer: Linux 5.15.53 xhci-hcd[    1.068449] usb usb1: SerialNumber: xhci-hcd.3.auto[    1.068634] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller[    1.069949] hub 1-0:1.0: USB hub found[    1.070341] hub 1-0:1.0: 1 port detected[    1.070994] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller[    1.071024] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2[    1.071487] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3[    1.071503] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed[    1.072372] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000080002030010[    1.072924] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.[    1.073550] xhci-hcd xhci-hcd.4.auto: irq 74, io mem 0xfe900000[    1.074364] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15[    1.075723]  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9[    1.076212] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.077260] usb usb3: Product: xHCI Host Controller[    1.077693] usb usb3: Manufacturer: Linux 5.15.53 xhci-hcd[    1.078178] usb usb3: SerialNumber: xhci-hcd.3.auto[    1.079218] hub 3-0:1.0: USB hub found[    1.079398] mmcblk2boot0: mmc2:0001 AJTD4R 4.00 MiB [    1.079594] hub 3-0:1.0: 1 port detected[    1.081072] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15[    1.081641] mmcblk2boot1: mmc2:0001 AJTD4R 4.00 MiB [    1.081824] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.082893] usb usb2: Product: xHCI Host Controller[    1.083330] usb usb2: Manufacturer: Linux 5.15.53 xhci-hcd[    1.083763] mmcblk2rpmb: mmc2:0001 AJTD4R 4.00 MiB, chardev (243:0)[    1.083817] usb usb2: SerialNumber: xhci-hcd.4.auto[    1.085631] hub 2-0:1.0: USB hub found[    1.086009] hub 2-0:1.0: 1 port detected[    1.086831] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller[    1.087332] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 4[    1.088021] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed[    1.088693] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.[    1.089602] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15[    1.090337] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.090977] usb usb4: Product: xHCI Host Controller[    1.091412] usb usb4: Manufacturer: Linux 5.15.53 xhci-hcd[    1.091900] usb usb4: SerialNumber: xhci-hcd.4.auto[    1.093097] hub 4-0:1.0: USB hub found[    1.093475] hub 4-0:1.0: 1 port detected[    1.096931] ehci-platform fe380000.usb: EHCI Host Controller[    1.097457] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5[    1.098321] ehci-platform fe380000.usb: irq 35, io mem 0xfe380000[    1.113142] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00[    1.114089] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15[    1.114826] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.115467] usb usb5: Product: EHCI Host Controller[    1.115902] usb usb5: Manufacturer: Linux 5.15.53 ehci_hcd[    1.116391] usb usb5: SerialNumber: fe380000.usb[    1.117630] hub 5-0:1.0: USB hub found[    1.118006] hub 5-0:1.0: 1 port detected[    1.121675] ehci-platform fe3c0000.usb: EHCI Host Controller[    1.122204] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 6[    1.123049] ehci-platform fe3c0000.usb: irq 37, io mem 0xfe3c0000[    1.137164] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00[    1.138126] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15[    1.138861] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.139502] usb usb6: Product: EHCI Host Controller[    1.139937] usb usb6: Manufacturer: Linux 5.15.53 ehci_hcd[    1.140425] usb usb6: SerialNumber: fe3c0000.usb[    1.141696] hub 6-0:1.0: USB hub found[    1.142078] hub 6-0:1.0: 1 port detected[    1.143660] ohci-platform fe3a0000.usb: Generic Platform OHCI controller[    1.144273] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 7[    1.145183] ohci-platform fe3a0000.usb: irq 36, io mem 0xfe3a0000[    1.209433] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15[    1.210188] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.210829] usb usb7: Product: Generic Platform OHCI controller[    1.211355] usb usb7: Manufacturer: Linux 5.15.53 ohci_hcd[    1.211843] usb usb7: SerialNumber: fe3a0000.usb[    1.213169] hub 7-0:1.0: USB hub found[    1.213545] hub 7-0:1.0: 1 port detected[    1.215108] ohci-platform fe3e0000.usb: Generic Platform OHCI controller[    1.215721] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 8[    1.216584] ohci-platform fe3e0000.usb: irq 38, io mem 0xfe3e0000[    1.281440] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15[    1.282194] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.282835] usb usb8: Product: Generic Platform OHCI controller[    1.283362] usb usb8: Manufacturer: Linux 5.15.53 ohci_hcd[    1.283850] usb usb8: SerialNumber: fe3e0000.usb[    1.285172] hub 8-0:1.0: USB hub found[    1.285554] hub 8-0:1.0: 1 port detected[    1.287931] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected![    1.289087] vdd_cpu_b: supplied by vcc3v3_sys[    1.291658] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected![    1.292724] vdd_gpu: supplied by vcc3v3_sys[    1.295265] rk808 0-001b: chip id: 0x0[    1.300258] rk808-regulator rk808-regulator: there is no dvs0 gpio[    1.300846] rk808-regulator rk808-regulator: there is no dvs1 gpio[    1.301968] vdd_center: supplied by vcc3v3_sys[    1.303203] vdd_cpu_l: supplied by vcc3v3_sys[    1.303998] vcc_ddr: supplied by vcc3v3_sys[    1.305014] vcc_1v8: supplied by vcc3v3_sys[    1.306086] vcc1v8_cam: supplied by vcc3v3_sys[    1.307683] vcc3v0_touch: supplied by vcc3v3_sys[    1.309845] vcc1v8_pmupll: supplied by vcc3v3_sys[    1.311814] vcc_sdio: supplied by vcc3v3_sys[    1.313404] vcca3v0_codec: supplied by vcc3v3_sys[    1.315177] vcc_1v5: supplied by vcc3v3_sys[    1.316630] vcca1v8_codec: supplied by vcc3v3_sys[    1.318448] vcc_3v0: supplied by vcc3v3_sys[    1.319761] vcc3v3_s3: supplied by vcc3v3_sys[    1.320529] vcc3v3_s0: supplied by vcc3v3_sys[    1.325011] rk808-rtc rk808-rtc: registered as rtc0[    1.325990] rk808-rtc rk808-rtc: setting system clock to 2022-07-28T09:45:09 UTC (1659001509)[    1.338868] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.[    1.339539] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.[    1.340131] dwmmc_rockchip fe320000.mmc: Version ID is 270a[    1.340698] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 33,32 bit host data width,256 deep fifo[    1.342382] dwmmc_rockchip fe320000.mmc: Got CD GPIO[    1.347180] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.[    1.347637] vcc1v8_s3: supplied by vcc_1v8[    1.347848] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.[    1.348772] dwmmc_rockchip fe310000.mmc: Version ID is 270a[    1.349091] vcca0v9_s3: supplied by vcc1v8_s3[    1.349337] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo[    1.350208] vcca1v8_s3: supplied by vcc1v8_s3[    1.350760] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq[    1.351171] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:[    1.351374] mmc_host mmc0: card is non-removable.[    1.352016] rockchip-pcie f8000000.pcie:      MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000[    1.353272] rockchip-pcie f8000000.pcie:       IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000[    1.354893] rockchip-pcie f8000000.pcie: no vpcie12v regulator found[    1.355937] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)[    1.366204] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)[    1.484179] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)[    1.625861] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 200[    1.633257] mmc0: new ultra high speed SDR104 SDIO card at address 0001[    1.856174] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout![    1.856827] rockchip-pcie: probe of f8000000.pcie failed with error -110[    1.859685] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found[    1.860287] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found[    1.861037] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock[    1.861853] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).[    1.862480] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).[    1.862983] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).[    1.863491] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).[    1.864098] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed[    1.864713] rk_gmac-dwmac fe300000.ethernet: clock input from PHY[    1.870287] rk_gmac-dwmac fe300000.ethernet: init for RGMII[    1.871120] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35[    1.871757] rk_gmac-dwmac fe300000.ethernet:  DWMAC1000[    1.872222] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported[    1.872880] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported[    1.873559] rk_gmac-dwmac fe300000.ethernet: COE Type 2[    1.874023] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported[    1.874643] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported[    1.875281] rk_gmac-dwmac fe300000.ethernet: Normal descriptors[    1.875805] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled[    1.876320] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer[    1.991480] input: adc-keys as /devices/platform/adc-keys/input/input0[    1.996777] input: gpio-keys as /devices/platform/gpio-keys/input/input1[    1.999940] ALSA device list:[    2.000221]   #0: hdmi-sound[    2.000872] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console[    2.014821] Freeing unused kernel memory: 9728K[    2.017465] Run /init as init process[    2.017801]   with arguments:[    2.017810]     /init[    2.017818]   with environment:[    2.017824]     HOME=/[    2.017831]     TERM=linux[    2.017837]     storagemedia=emmc[    2.017844]     data=/dev/mmcblk2p9[    2.017850]     cgroup_enable=memory[    2.017857]     cgroup_memory=1[    2.077289] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes[    2.463170] rk_gmac-dwmac fe300000.ethernet: init for RGMII[    2.470611] rk_gmac-dwmac fe300000.ethernet: init for RGMII[    2.476655] rk_gmac-dwmac fe300000.ethernet: init for RGMII[    2.644469] EXT4-fs (mmcblk2p8): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.[    2.838838] EXT4-fs (mmcblk2p9): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.[    2.847735] EXT4-fs (mmcblk2p9): re-mounted. Opts: (null). Quota mode: none.[    2.858980] overlayfs: "xino" feature enabled using 32 upper inode bits.[    2.990777] init: Console is alive[    2.991298] init: - watchdog -[    4.023026] kmodloader: loading kernel modules from /etc/modules-boot.d/*[    4.062066] Key type encrypted registered[    4.169138] raid6: neonx8   gen()  2615 MB/s[    4.237086] raid6: neonx8   xor()   826 MB/s[    4.305040] raid6: neonx4   gen()  1670 MB/s[    4.373051] raid6: neonx4   xor()  1222 MB/s[    4.441051] raid6: neonx2   gen()  1468 MB/s[    4.509052] raid6: neonx2   xor()  1165 MB/s[    4.577047] raid6: neonx1   gen()  1150 MB/s[    4.645037] raid6: neonx1   xor()   926 MB/s[    4.713050] raid6: int64x8  gen()   941 MB/s[    4.781045] raid6: int64x8  xor()   536 MB/s[    4.849054] raid6: int64x4  gen()  1039 MB/s[    4.917036] raid6: int64x4  xor()   588 MB/s[    4.985047] raid6: int64x2  gen()   945 MB/s[    5.053036] raid6: int64x2  xor()   542 MB/s[    5.121047] raid6: int64x1  gen()   743 MB/s[    5.189046] raid6: int64x1  xor()   391 MB/s[    5.189442] raid6: using algorithm neonx8 gen() 2615 MB/s[    5.189923] raid6: .... xor() 826 MB/s, rmw enabled[    5.190356] raid6: using neon recovery algorithm[    5.198640] xor: measuring software checksum speed[    5.202849]    8regs           :  2666 MB/sec[    5.206827]    32regs          :  2766 MB/sec[    5.211453]    arm64_neon      :  2366 MB/sec[    5.211846] xor: using function: 32regs (2766 MB/sec)[    5.273623] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no[    5.281167] kmodloader: done loading kernel modules from /etc/modules-boot.d/*[    5.291969] init: - preinit -[    7.739450] blk_update_request: I/O error, dev mmcblk2, sector 1769560 op 0x1:(WRITE) flags 0x4000 phys_seg 128 prio class 0[    7.742960] blk_update_request: I/O error, dev mmcblk2, sector 1770584 op 0x1:(WRITE) flags 0x0 phys_seg 128 prio class 0[    7.746826] blk_update_request: I/O error, dev mmcblk2, sector 1771608 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 0[    9.704028] mount_root: mounting /dev/root[    9.742250] mount_root: loading kmods from internal overlay[    9.958567] kmodloader: loading kernel modules from //etc/modules-boot.d/*[    9.962311] kmodloader: done loading kernel modules from //etc/modules-boot.d/*[   10.045411] block: attempting to load /etc/config/fstab[   10.047205] block: extroot: not configured[   10.051133] urandom-seed: Seeding with /etc/urandom.seed[   10.285493] procd: - early -[   10.285912] procd: - watchdog -[   10.858854] procd: - watchdog -[   10.859951] procd: - ubus -[   10.912978] procd: - init -[   11.041760] urngd: v1.0.2 started.[   11.395324] kmodloader: loading kernel modules from /etc/modules.d/*[   11.431601] cfg80211: Loading compiled-in X.509 certificates for regulatory database[   11.438122] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'[   11.466348] usbcore: registered new interface driver mt76x2u[   11.471033] usbcore: registered new interface driver r8152[   11.506174] rtl8812au: loading out-of-tree module taints kernel.[   11.519948] usbcore: registered new interface driver 88XXau[   11.547788] usbcore: registered new interface driver rtl8821cu[   11.580543] usbcore: registered new interface driver rtl88x2bu[   11.592048] NET: Registered PF_ATMPVC protocol family[   11.592500] NET: Registered PF_ATMSVC protocol family[   11.601103] ntfs3: Max link count 4000[   11.601440] ntfs3: Enabled Linux POSIX ACLs support[   11.601865] ntfs3: Read-only LZX/Xpress compression included[   11.605948] NET: Registered PF_KEY protocol family[   11.614016] tun: Universal TUN/TAP device driver, 1.6[   11.639258] l2tp_core: L2TP core driver, V2.0[   11.642470] l2tp_netlink: L2TP netlink interface[   11.652432] gre: GRE over IPv4 demultiplexor driver[   11.655560] ip_gre: GRE over IPv4 tunneling driver[   11.738945] GACT probability on[   11.742688] Mirror/redirect action on[   11.760227] u32 classifier[   11.760477]     input device check on[   11.760797]     Actions configured[   11.796613] usbcore: registered new interface driver cdc_ncm[   11.799890] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully[   11.842852] PPP MPPE Compression module registered[   11.843826] NET: Registered PF_PPPOX protocol family[   11.845001] PPTP driver version 0.8.5[   11.874173] xt_time: kernel timezone is -0000[   11.886425] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2[   11.887555] usbcore: registered new interface driver brcmfmac[   11.888094] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4356-sdio.friendlyelec,nanopc-t4.bin failed with error -2[   11.889118] brcmfmac mmc0:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac4356-sdio.friendlyelec,nanopc-t4.bin[   11.893981] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.[   11.896167] usbcore: registered new interface driver cdc_mbim[   11.899963] l2tp_ppp: PPPoL2TP kernel driver, V2.0[   11.907531] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.[   11.908221] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.[   11.910093] Bridge firewalling registered[   11.911975] kmodloader: done loading kernel modules from /etc/modules.d/*[   14.000612] rk_gmac-dwmac fe300000.ethernet: init for RGMII[   14.006702] rk_gmac-dwmac fe300000.ethernet: init for RGMII[   14.018114] rk_gmac-dwmac fe300000.ethernet: init for RGMII[   14.062266] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=89)[   14.065044] rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0[   14.073043] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found[   14.073721] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW[   14.074603] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode[   14.938938] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2[   15.197973] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-12), device may have limited channels available[   15.203830] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: Mar  6 2020 10:50:21 version 7.36.79.7.35 (a1c40d1@shgit) (r) FWID 01-6d217742[   15.682509] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx[   15.810039] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready[   17.514013] overlayfs: filesystem on '/opt/docker/check-overlayfs-support988783198/upper' not supported as upperdir[   17.520768] overlayfs: filesystem on '/opt/docker/check-overlayfs-support3707168062/upper' not supported as upperdir[   33.753368] vcca0v9_s3: disabling[   81.298159] blk_update_request: I/O error, dev mmcblk2, sector 1511472 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 0[   81.299178] Buffer I/O error on dev mmcblk2p9, logical block 518, lost sync page write[   81.299942] EXT4-fs error (device mmcblk2p9): ext4_check_bdev_write_error:218: comm exe: Error while async write back metadata[   81.301026] Aborting journal on device mmcblk2p9-8.[   81.301512] EXT4-fs error (device mmcblk2p9): ext4_journal_check_start:83: comm dockerd: Detected aborted journal[   81.301523] EXT4-fs error (device mmcblk2p9): ext4_journal_check_start:83: comm dockerd: Detected aborted journal[   81.302634] blk_update_request: I/O error, dev mmcblk2, sector 1512496 op 0x1:(WRITE) flags 0x800 phys_seg 59 prio class 0[   81.304056] EXT4-fs (mmcblk2p9): Remounting filesystem read-only[   81.304129] EXT4-fs (mmcblk2p9): Remounting filesystem read-only[   81.304141] EXT4-fs error (device mmcblk2p9) in __ext4_new_inode:1136: Journal has aborted

级别: 新手上路
UID: 147742
精华: 0
发帖: 4
金钱: 20 两
威望: 4 点
贡献值: 0 点
综合积分: 8 分
注册时间: 2022-07-28
最后登录: 2022-08-04
1楼  发表于: 20天前
试了下21版也有这个问题
级别: 新手上路
UID: 147742
精华: 0
发帖: 4
金钱: 20 两
威望: 4 点
贡献值: 0 点
综合积分: 8 分
注册时间: 2022-07-28
最后登录: 2022-08-04
2楼  发表于: 20天前
用SFTP往上传多个文件也能复现这个问题,前几个文件可以正常传,后面就发现文件系统变成只读没法传了
级别: 新手上路
UID: 147742
精华: 0
发帖: 4
金钱: 20 两
威望: 4 点
贡献值: 0 点
综合积分: 8 分
注册时间: 2022-07-28
最后登录: 2022-08-04
3楼  发表于: 13天前
有大佬帮忙看看吗