主题 : NANOPI_M1_PLUS sd卡烧写img后,一直重启 复制链接 | 浏览器收藏 | 打印
级别: 新手上路
UID: 146495
精华: 0
发帖: 1
金钱: 5 两
威望: 1 点
贡献值: 0 点
综合积分: 2 分
注册时间: 2021-07-14
最后登录: 2021-07-14
楼主  发表于: 2021-07-14 11:09

 NANOPI_M1_PLUS sd卡烧写img后,一直重启

请问我购买了NANOPI_M1_PLUS开发板,现在按照WIKI(http://wiki.friendlyarm.com/wiki/index.php/How_to_Build_FriendlyWrt)的说明,按照5.5章节,生成FriendlyWrt_20210714_NanoPi-M1-Plus_armhf_sd.img,然后使用dd命令烧写到TF卡里面。将TF卡放入板卡的TF卡槽中,重启设备,设备串口打印如下,

设备就一直进不了系统,一直重启。请问有没有技术交流群呢?制作固件,烧写这些基础问题,我就可以群里问一下了。

===打印开始===
U-Boot 2017.11-05004-g73e3bbb832 (Jul 13 2021 - 16:36:23 +0800) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: FriendlyElec NanoPi H3
DRAM:  1 GiB
CPU Freq: 1008MHz
MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
BOARD: nanopi-m1-plus
starting USB...
No controllers found
Hit any key to stop autoboot:  0
reading boot.scr
1478 bytes read in 19 ms (75.2 KiB/s)
## Executing script at 43100000
running boot.scr
reading uEnv.txt
968 bytes read in 18 ms (51.8 KiB/s)
reading zImage
5901616 bytes read in 293 ms (19.2 MiB/s)
reading rootfs.cpio.gz
5880768 bytes read in 288 ms (19.5 MiB/s)
reading sun8i-h3-nanopi-m1-plus.dtb
37691 bytes read in 26 ms (1.4 MiB/s)
overlays is empty
reading overlays/sun8i-h3-fixup.scr
4109 bytes read in 36 ms (111.3 KiB/s)
## Executing script at 44500000
## Flattened Device Tree blob at 48000000
   Booting using the fdt blob at 0x48000000
   Loading Ramdisk to 49a64000, end 49fffbc0 ... OK
   reserving fdt memory region: addr=48000000 size=6f000
   Loading Device Tree to 499f2000, end 49a63fff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.111 (root@V3S) (gcc version 4.9.3 (ctng-1.21.0-229g-FA)) #1 SMP Tue Jul 13 16:50:19 CST 2021
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=30c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: FriendlyElec NanoPi-M1-Plus
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x000000007bc00000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 17 pages/cpu @ef69a000 s37120 r8192 d24320 u69632
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260416
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait fsck.repair=yes panic=10 fbcon=map:0  data=/dev/mmcblk0p3 snd-soc-core.pmdown_time=3600000
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 949256K/1048576K available (10240K kernel code, 391K rwdata, 2080K rodata, 2048K init, 303K bss, 33784K reserved, 65536K cma-reserved, 196600K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0c00000   (12256 kB)
[    0.000000]       .init : 0xc1000000 - 0xc1200000   (2048 kB)
[    0.000000]       .data : 0xc1200000 - 0xc1261f00   ( 392 kB)
[    0.000000]        .bss : 0xc126a884 - 0xc12b6850   ( 304 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000018] Switching to timer-based delay loop, resolution 41ns
[    0.000232] Console: colour dummy device 80x30
[    0.000271] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
[    0.000285] pid_max: default: 32768 minimum: 301
[    0.000443] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000458] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001159] CPU: Testing write buffer coherency: ok
[    0.001599] CPU0: update cpu_capacity 1024
[    0.001612] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001967] Setting up static identity map for 0x40200000 - 0x40200060
[    0.002092] Hierarchical SRCU implementation.
[    0.002645] smp: Bringing up secondary CPUs ...
[    0.013440] CPU1: update cpu_capacity 1024
[    0.013447] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.024329] CPU2: update cpu_capacity 1024
[    0.024335] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.035126] CPU3: update cpu_capacity 1024
[    0.035132] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.035216] smp: Brought up 1 node, 4 CPUs
[    0.035245] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.035251] CPU: All CPU(s) started in HYP mode.
[    0.035257] CPU: Virtualization extensions available.
[    0.036026] devtmpfs: initialized
[    0.043148] random: get_random_u32 called from bucket_table_alloc+0xf0/0x240 with crng_init=0
[    0.043749] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.043999] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
[    0.044022] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.046649] xor: measuring software checksum speed
[    0.094912]    arm4regs  :  1372.800 MB/sec
[    0.144968]    8regs     :   769.600 MB/sec
[    0.195022]    32regs    :   850.400 MB/sec
[    0.245079]    neon      :  1283.200 MB/sec
[    0.245087] xor: using function: arm4regs (1372.800 MB/sec)
[    0.245106] pinctrl core: initialized pinctrl subsystem
[    0.246077] NET: Registered protocol family 16
[    0.247408] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.248336] cpuidle: using governor ladder
[    0.248488] cpuidle: using governor menu
[    0.248892] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.248903] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.268312] cam500b-avdd: supplied by vcc3v3
[    0.268590] cam500b-dovdd: supplied by vcc3v3
[    0.268805] cam500b-dvdd: supplied by vcc3v3
[    0.269660] SCSI subsystem initialized
[    0.270068] usbcore: registered new interface driver usbfs
[    0.270113] usbcore: registered new interface driver hub
[    0.270204] usbcore: registered new device driver usb
[    0.270395] media: Linux media interface: v0.10
[    0.270430] Linux video capture interface: v2.00
[    0.270526] pps_core: LinuxPPS API ver. 1 registered
[    0.270534] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.270553] PTP clock support registered
[    0.270875] Advanced Linux Sound Architecture Driver Initialized.
[    0.272421] clocksource: Switched to clocksource arch_sys_counter
[    0.272639] VFS: Disk quotas dquot_6.6.0
[    0.272708] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.272851] FS-Cache: Loaded
[    0.279704] NET: Registered protocol family 2
[    0.280358] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.280450] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.280564] TCP: Hash tables configured (established 8192 bind 8192)
[    0.280676] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.280751] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.280983] NET: Registered protocol family 1
[    0.281432] RPC: Registered named UNIX socket transport module.
[    0.281444] RPC: Registered udp transport module.
[    0.281450] RPC: Registered tcp transport module.
[    0.281455] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.281668] Unpacking initramfs...
[    0.579141] Freeing initrd memory: 5744K
[    0.579559] kvm [1]: 8-bit VMID
[    0.580221] kvm [1]: vgic interrupt IRQ16
[    0.580321] kvm [1]: Hyp mode initialized successfully
[    0.583247] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.587812] zbud: loaded
[    0.589385] FS-Cache: Netfs 'nfs' registered for caching
[    0.589889] NFS: Registering the id_resolver key type
[    0.589928] Key type id_resolver registered
[    0.589935] Key type id_legacy registered
[    0.589950] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.589967] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.590858] fuse init (API version 7.26)
[    0.596104] async_tx: api initialized (async)
[    0.596184] bounce: pool size: 64 pages
[    0.596279] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.596451] io scheduler noop registered (default)
[    0.596462] io scheduler deadline registered
[    0.596643] io scheduler cfq registered
[    0.596654] io scheduler mq-deadline registered
[    0.596776] io scheduler bfq registered
[    0.597536] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO, pinctrl may not init
[    0.601334] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.602939] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    0.608514] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.610326] console [ttyS0] disabled
[    0.630506] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 46, base_baud = 1500000) is a U6_16550A
[    1.408930] console [ttyS0] enabled
[    1.435194] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 47, base_baud = 1500000) is a U6_16550A
[    1.466762] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 48, base_baud = 1500000) is a U6_16550A
[    1.496326] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 49, base_baud = 1500000) is a U6_16550A
[    1.507695] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.514326] [drm] No driver support for vblank timestamp query.
[    1.529640] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc0c51b68)
[    1.536740] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
[    1.544596] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0c5086c)
[    1.677588] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
[    1.687481] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.695184] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc0c51ee8)
[    1.702027] [drm] Cannot find any crtc or sizes - going 1920x1080
[    1.745958] Console: switching to colour frame buffer device 240x67
[    1.776813] sun4i-drm display-engine: fb0:  frame buffer device
[    1.783190] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
[    1.799415] loop: module loaded
[    1.817715] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[    1.824095] osst :I: Tape driver with OnStream support version 0.99.4
[    1.824095] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    1.837434] SCSI Media Changer driver v0.25
[    1.843699] libphy: Fixed MDIO Bus: probed
[    1.847841] tun: Universal TUN/TAP device driver, 1.6
[    1.853074] CAN device driver interface
[    1.857676] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[    1.863892] PPP generic driver version 2.4.2
[    1.868337] PPP BSD Compression module registered
[    1.873059] PPP Deflate Compression module registered
[    1.878137] PPP MPPE Compression module registered
[    1.882932] NET: Registered protocol family 24
[    1.887476] usbcore: registered new interface driver qmi_wwan
[    1.893261] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.899802] ehci-platform: EHCI generic platform driver
[    1.905246] ehci-platform 1c1a000.usb: EHCI Host Controller
[    1.910885] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[    1.919045] ehci-platform 1c1a000.usb: irq 30, io mem 0x01c1a000
[    1.937445] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[    1.943728] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.950528] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.957754] usb usb1: Product: EHCI Host Controller
[    1.962636] usb usb1: Manufacturer: Linux 4.14.111 ehci_hcd
[    1.968213] usb usb1: SerialNumber: 1c1a000.usb
[    1.973266] hub 1-0:1.0: USB hub found
[    1.977044] hub 1-0:1.0: 1 port detected
[    1.981686] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.987910] ohci-platform: OHCI generic platform driver
[    1.993346] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[    1.999990] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[    2.007925] ohci-platform 1c1a400.usb: irq 31, io mem 0x01c1a400
[    2.076598] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.083409] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.090637] usb usb2: Product: Generic Platform OHCI controller
[    2.096561] usb usb2: Manufacturer: Linux 4.14.111 ohci_hcd
[    2.102138] usb usb2: SerialNumber: 1c1a400.usb
[    2.109516] hub 2-0:1.0: USB hub found
[    2.113311] hub 2-0:1.0: 1 port detected
[    2.117960] usbcore: registered new interface driver cdc_acm
[    2.123634] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.131732] usbcore: registered new interface driver usblp
[    2.137268] usbcore: registered new interface driver cdc_wdm
[    2.142969] usbcore: registered new interface driver uas
[    2.148360] usbcore: registered new interface driver usb-storage
[    2.154443] usbcore: registered new interface driver usbserial
[    2.160312] usbcore: registered new interface driver usbserial_generic
[    2.166868] usbserial: USB Serial support registered for generic
[    2.172917] usbcore: registered new interface driver option
[    2.178517] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.185614] usbcore: registered new interface driver qcserial
[    2.191395] usbserial: USB Serial support registered for Qualcomm USB modem
[    2.199240] mousedev: PS/2 mouse device common for all mice
[    2.205342] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
[    2.212144] sun6i-rtc 1f00000.rtc: RTC enabled
[    2.216667] i2c /dev entries driver
[    2.254852] ov5640 2-003c: ov5640_check_chip_id: failed to read chip identifier
[    2.262564] lirc_dev: IR Remote Control driver registered, major 244
[    2.268930] IR NEC protocol handler initialized
[    2.273464] IR RC5(x/sz) protocol handler initialized
[    2.278518] IR RC6 protocol handler initialized
[    2.283051] IR JVC protocol handler initialized
[    2.287589] IR Sony protocol handler initialized
[    2.292200] IR SANYO protocol handler initialized
[    2.296918] IR Sharp protocol handler initialized
[    2.301624] IR MCE Keyboard/mouse protocol handler initialized
[    2.307456] IR LIRC bridge handler initialized
[    2.311893] IR XMP protocol handler initialized
[    2.318055] thermal thermal_zone0: failed to read out thermal zone (-16)
[    2.325283] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    2.333652] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    2.382489] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    2.391376] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[    2.432629] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.445361] mmc0: new high speed SDHC card at address aaaa
[    2.451241] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
[    2.460033]  mmcblk0: p1 p2 p3
[    2.647450] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
[    2.670197] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.677225] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.684223] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.692436] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.692480] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
[    2.701212] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[    2.710492] ledtrig-cpu: registered to indicate activity on CPUs
[    2.716750] hidraw: raw HID events driver (C) Jiri Kosina
[    2.722317] usbcore: registered new interface driver usbhid
[    2.727893] usbhid: USB HID core driver
[    2.744408] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
[    2.746805] random: fast init done
[    2.754430] Initializing XFRM netlink socket
[    2.757294] mmc1: new DDR MMC card at address 0001
[    2.759451] NET: Registered protocol family 10
[    2.764205] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB
[    2.777117] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
[    2.783483] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
[    2.789230] Segment Routing with IPv6
[    2.790467]  mmcblk1: p1 p2 p3
[    2.793202] NET: Registered protocol family 17
[    2.800705] NET: Registered protocol family 15
[    2.802659] mmc2: new high speed SDIO card at address 0001
[    2.805168] can: controller area network core (rev 20170425 abi 9)
[    2.816891] NET: Registered protocol family 29
[    2.821355] can: raw protocol (rev 20170425)
[    2.825651] can: broadcast manager protocol (rev 20170425 t)
[    2.831328] can: netlink gateway (rev 20170425) max_hops=1
[    2.837637] rfkill_gpio rfkill_bt: sunxi-bt device registered.
[    2.843636] Key type dns_resolver registered
[    2.848235] Registering SWP/SWPB emulation handler
[    2.854416] registered taskstats version 1
[    2.866787] Key type encrypted registered
[    2.876529] vcc1v2: supplied by vcc5v0
[    2.880660] vcc-dram: supplied by vcc5v0
[    2.884857] vdd-cpux-en: supplied by vcc5v0
[    2.891171] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[    2.897115] dwmac-sun8i 1c30000.ethernet: Will use external PHY
[    3.012615] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[    3.018285] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[    3.025512] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[    3.031175] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[    3.038400] dwmac-sun8i 1c30000.ethernet: COE Type 2
[    3.043368] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[    3.050743] libphy: stmmac: probed
[    3.060011] ehci-platform 1c1b000.usb: EHCI Host Controller
[    3.065651] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
[    3.073861] ehci-platform 1c1b000.usb: irq 32, io mem 0x01c1b000
[    3.092443] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[    3.098735] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.105532] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.112755] usb usb3: Product: EHCI Host Controller
[    3.117635] usb usb3: Manufacturer: Linux 4.14.111 ehci_hcd
[    3.123209] usb usb3: SerialNumber: 1c1b000.usb
[    3.128329] hub 3-0:1.0: USB hub found
[    3.132113] hub 3-0:1.0: 1 port detected
[    3.136759] ehci-platform 1c1c000.usb: EHCI Host Controller
[    3.142370] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 4
[    3.150462] ehci-platform 1c1c000.usb: irq 34, io mem 0x01c1c000
[    3.167435] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    3.173691] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    3.180491] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.187717] usb usb4: Product: EHCI Host Controller
[    3.192600] usb usb4: Manufacturer: Linux 4.14.111 ehci_hcd
[    3.198175] usb usb4: SerialNumber: 1c1c000.usb
[    3.203192] hub 4-0:1.0: USB hub found
[    3.206971] hub 4-0:1.0: 1 port detected
[    3.211535] ehci-platform 1c1d000.usb: EHCI Host Controller
[    3.217142] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 5
[    3.225142] ehci-platform 1c1d000.usb: irq 36, io mem 0x01c1d000
[    3.242430] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
[    3.248667] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    3.255465] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.262689] usb usb5: Product: EHCI Host Controller
[    3.267572] usb usb5: Manufacturer: Linux 4.14.111 ehci_hcd
[    3.273147] usb usb5: SerialNumber: 1c1d000.usb
[    3.278136] hub 5-0:1.0: USB hub found
[    3.281921] hub 5-0:1.0: 1 port detected
[    3.286465] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[    3.293119] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6
[    3.301080] ohci-platform 1c1b400.usb: irq 33, io mem 0x01c1b400
[    3.366570] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    3.373373] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.380597] usb usb6: Product: Generic Platform OHCI controller
[    3.386521] usb usb6: Manufacturer: Linux 4.14.111 ohci_hcd
[    3.392098] usb usb6: SerialNumber: 1c1b400.usb
[    3.397379] hub 6-0:1.0: USB hub found
[    3.401191] hub 6-0:1.0: 1 port detected
[    3.405734] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    3.412387] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7
[    3.420324] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
[    3.486580] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    3.493381] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.500606] usb usb7: Product: Generic Platform OHCI controller
[    3.506529] usb usb7: Manufacturer: Linux 4.14.111 ohci_hcd
[    3.512107] usb usb7: SerialNumber: 1c1c400.usb
[    3.517118] hub 7-0:1.0: USB hub found
[    3.520915] hub 7-0:1.0: 1 port detected
[    3.525464] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
[    3.532108] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8
[    3.540049] ohci-platform 1c1d400.usb: irq 37, io mem 0x01c1d400
[    3.606585] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    3.613386] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.620611] usb usb8: Product: Generic Platform OHCI controller
[    3.626534] usb usb8: Manufacturer: Linux 4.14.111 ohci_hcd
[    3.632112] usb usb8: SerialNumber: 1c1d400.usb
[    3.637106] hub 8-0:1.0: USB hub found
[    3.640901] hub 8-0:1.0: 1 port detected
[    3.645502] usb_phy_generic usb_phy_generic.3.auto: usb_phy_generic.3.auto supply vcc not found, using dummy regulator
[    3.656579] musb-hdrc musb-hdrc.4.auto: MUSB HDRC host driver
[    3.662350] musb-hdrc musb-hdrc.4.auto: new USB bus registered, assigned bus number 9
[    3.670329] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[    3.677133] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.684360] usb usb9: Product: MUSB HDRC host driver
[    3.689331] usb usb9: Manufacturer: Linux 4.14.111 musb-hcd
[    3.694907] usb usb9: SerialNumber: musb-hdrc.4.auto
[    3.700356] hub 9-0:1.0: USB hub found
[    3.704158] hub 9-0:1.0: 1 port detected
[    3.710905] asoc-simple-card soc:sound: i2s-hifi <-> 1c22800.i2s mapping ok
[    3.720148] input: r_gpio_keys as /devices/platform/r_gpio_keys/input/input0
[    3.727948] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:33:54 UTC (2034)
[    3.736534] vcc3v0: disabling
[    3.739522] vcc5v0: disabling
[    3.742495] cam500b-avdd: disabling
[    3.745981] cam500b-dovdd: disabling
[    3.749562] cam500b-dvdd: disabling
[    3.753062] usb0-vbus: disabling
[    3.756291] ALSA device list:
[    3.759265]   #0: Dummy 1
[    3.761882]   #1: Loopback 1
[    3.764767]   #2: H3 Audio Codec
[    3.768013]   #3: allwinner,hdmi
[    3.773683] Freeing unused kernel memory: 2048K
Loading, please wait...
starting version 237
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[    4.539112] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Begin: Will now check userdata file system ... fsck from util-linux 2.31.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p3] fsck.ext4 -y -C0 /dev/mmcblk0p3
e2fsck 1.44.1 (24-Mar-2018)
userdata: recovering journal
userdata: clean, 15/1516800 files, 96403/7736448 blocks
done.
[    4.807400] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    4.825997] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... mount: mounting /dev on /overlay/dev failed: No such file or directory
mount: mounting /dev on /overlay/dev failed: No such file or directory
done.
run-init: opening console: No such file or directory
Target filesystem doesn't have requested /sbin/init.
run-init: opening console: No such file or directory
run-init: opening console: No such file or directory
run-init: opening console: No such file or directory
run-init: opening console: No such file or directory
run-init: opening console: No such file or directory
No init found. Try passing init= bootarg.
Rebooting automatically due to panic= boot argument
[   14.913424] kvm: exiting hardware virtualization
[   14.925571] dwmac-sun8i 1c30000.ethernet eth0: stmmac_dvr_remove: removing driver
[   14.997457] reboot: Restarting system

U-Boot SPL 2017.11-05004-g73e3bbb832 (Jul 13 2021 - 16:36:23)
DRAM: 1024 MiB(408MHz)
CPU Freq: 408MHz
===打印结束===
级别: 新手上路
UID: 147566
精华: 0
发帖: 1
金钱: 5 两
威望: 1 点
贡献值: 0 点
综合积分: 2 分
注册时间: 2022-06-16
最后登录: 2022-06-16
1楼  发表于: 12天前
请问解决了吗?我也出现了你的问题