我的已成功启动,可是却打印出来DRAM为0kbit,研究了好久也买研究出来,希望大家可以加我QQ讨论:396208070
U-Boot 2010.09 (Sep 26 2016 - 08:52:14) for TINY6410
CPU: S3C6400@667MHz
Fclk = 667MHz, Hclk = 133MHz, Pclk = 66MHz (ASYNC Mode)
Board: tiny6410
the PHYS_SDRAM_1 of dram_init funtion is:50000000
the PHYS_SDRAM_1_SIZE of dram_init funtion is:10000000
the gd->bd->bi_dram[0].start of dram_init funtion is:0
the gd->bd->bi_dram[0].size of dram_init funtion is:0
the address of gd->bd->bi_dram is:57cfbfd8
CONFIG_NR_DRAM_BANKS =1
PHYS_SDRAM_1_Sart =50000000
PHYS_SDRAM_1_SIZE =10000000
TEXT_BASE =57e00000
gd->bd->bi_dram[0] =0
DRAM: 0 Bytes
NAND: 256 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: dm9000
Start linux parameter at 0
MACH_TYPE=0
Linux command line is:console=ttySAC,115200
The address of _armboot_start is:57e00000
The Lenth of CONFIG_SYS_MALLOC_LEN is:104000
The Size of gd_t is:20
The address of gd is:57cfbfe0
The gd->baudrate is:115200
The gd->bd->bi_ip_addr is:
The gd->bd->bi_arch_number is:<NULL>
Now enter into mainloop!
Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x60000, size 0x1c0000
1835008 bytes read: OK
Wrong Image Format for bootm command
ERROR: can't get kernel image!
ANDY6410 #