我用附件中的UBOOT启动时，
按住任何键都进不了命令行。。
而且打印信息的Hit any key to stop autoboot:刚出来时是1，后面再打印几行后这儿就变成0了~~
U-Boot 2009.11 ( 4鏈?04 2010 - 12:09:25)
modified by tekkamanninja (
tekkamanninja@163.com)
Love Linux forever!!
I2C: ready
DRAM: 64 MB
Flash: 2 MB
NAND: 128 MiB
*** Warning - bad CRC or NAND, using default environment
Video: 240x320x16 20kHz 62Hz
In: serial
Out: serial
Err: serial
Net: dm9000
U-Boot 2009.11 ( 4鏈?04 2010 - 12:09:25)
modified by tekkamanninja
(
tekkamanninja@163.com)
Love Linux forever!!
Hit any key to stop autoboot: 0 //先为1，后变为0
dm9000 i/o: 0x20000300, id: 0x90000a46
DM9000: running in 16 bit mode
MAC: 08:08:11:18:12:27
operating at 100M full duplex mode
Using dm9000 device
File transfer via NFS from server 192.168.0.1; our IP address is 192.168.0.2
Filename '/home/tekkaman/working/nfs/zImage.img'.
Load address: 0x30008000
Loading: *
这时按CTRL+C却能进命令行
