U-Boot 1.1.6 (Dec 31 2010 - 14:07:41) for FriendlyARM MINI6410
CPU: S3C6410@532MHz
Fclk = 532MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (SYNC Mode)
Board: MINI6410
DRAM: 128 MB
Flash: 0 kB
NAND: NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)
NAND bus width 8 instead 16 bit
No NAND device found!!!
0 MB
K
开发板出现提示：1.Switch S2 to NAND! 2.Toggle S1 to GO!
我把s2拨到NAND，然后超级终端就弹出了上面的提示信息。
