，自己建立文件弄的，就是在DWN上面总是没显示，最后移植了一个，修改就可以了。这次又遇到同样的问题，具体打印是：
Download BIN file information:
-----------------------------------------------------
[0]: Base Address=0x80200000 Length=0x18fd7dc
-----------------------------------------------------
RAM image
rom_offset=0x0.
ROMHDR at Address 80200044h
Writing single region/multi-region update, dwBINFSPartLength: 26204124
IsValidMBR: MBR sector = 0x400
OpenPartition: Partition Exists=0x0 for part 0x21.
CreatePartition: Enter CreatePartition for 0x21.
LastLogSector: Last log sector is: 0x1faff.
CreatePartition: Start = 0x500, Num = 0xc800.
Log2Phys: Logical 0x500 -> Physical 0x900
WriteMBR: MBR block = 0x4.
BP_SetDataPointer at 0x0
WriteData: Start = 0x0, Length = 0x18fd7dc.
Log2Phys: Logical 0x500 -> Physical 0x900
Updateded TOC!
IsValidMBR: MBR sector = 0x400
OpenPartition: Partition Exists=0x0 for part 0xb.
CreatePartition: Enter CreatePartition for 0xb.
FindFreeSector: FreeSector is: 0xcd00 after processing part 0x21.
CreatePartition: Num sectors set to 0x12c00 to allow for compaction blocks.
CreatePartition: Start = 0xcd00, Num = 0x12c00.
WriteMBR: MBR block = 0x4.
TOC {
dwSignature: 0x434F544E
BootCfg {
ConfigFlags: 0x830
BootDelay: 0x5
ImageIndex: 1
IP: 0.0.0.0
MAC Address: 00:00:32:12:33:12
Port: 0.0.0.0
SubnetMask: 255.255.255.0
}
ID[0] {
dwVersion: 0x20004
dwSignature: 0x45424F54
String: 'eboot.nb0'
dwImageType: 0x2
dwTtlSectors: 0x17B
dwLoadAddress: 0x80038000
dwJumpAddress: 0x80039000
dwStoreOffset: 0x0
sgList[0].dwSector: 0x200
sgList[0].dwLength: 0x17B
}
ID[1] {
dwVersion: 0x1
dwSignature: 0x43465348
String: ''
dwImageType: 0x2
dwTtlSectors: 0xC7EC
dwLoadAddress: 0x80200000
dwJumpAddress: 0x8029E764
dwStoreOffset: 0x0
sgList[0].dwSector: 0x900
sgList[0].dwLength: 0xC7EC
}
chainInfo.dwLoadAddress: 0X00000000
chainInfo.dwFlashAddress: 0X00000000
chainInfo.dwLength: 0X00000000
}
waitforconnect
INFO: OEMLaunch: Jumping to Physical Address 0x3029E764h (Virtual Address 0x8029E764h)...
