NOW, Booting Linux......

VIVI version 0.1.4 (root@capcross) (gcc version 2.95.3 20010315 (release)) #0.18
MMU table base address = 0x33DFC000                                            
Succeed memory mapping.                                                        
DIVN_UPLL0                                                                      
MPLLVal [M:7fh,P:2h,S:1h]                                                      
CLKDIVN:5h                                                                      
                                                                                
                                                                                
+alid USB device address.                                                      
                                                                                
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)          
Could not found stored vivi parameters. Use default vivi parameters.            
Press Return to start the LINUX/Wince now, any other key for vivi              
Copy linux kernel from 0x00050000 to 0x30008000, size = 0x00200000 ... done    
zImage magic = 0x016f2818                                                      
Setup linux parameters at 0x30000100                                            
linux command line is: "noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttyS"
MACH_TYPE = 782                                                                
NOW, Booting Linux......    

我更新内核后就卡在那不动了，请问版主可能是什么原因阿？我更新的是linux-2.6.29内核，

交叉编译进行过如下修改，但是如果不修改就编译出错（注：修改后编译成功）：
CROSS_COMPILE    = /usr/local/arm/4.3.2/bin/arm-linux- 改为：
CROSS_COMPILE    = /usr/local/arm/4.3.2/bin/arm-none-linux-gnueabi-