按照友善的《Tiny4412用户手册》进行操作，使用arm-linux-gcc-4.5.1编译器，ubuntu 64位机器。但系统还是起不来，麻烦大侠解答下。下面是log
Superboot-4412 V1.1(20130814) by FriendlyARM
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-FriendlyARM (root@charles-ThinkPad-X200) (gcc version 4.5.1 (ctng-1.8.1-FA) ) #1 SMP PREEMPT Wed Aug 28 18:03:51 CST 2013
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: TINY4412
[ 0.000000] TINY4412: HD700 selected
[ 0.000000] cma: CMA: reserved 32 MiB at 6d800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] CPU EXYNOS4412 (id 0xe4412011)
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] s3c_register_clksrc: clock armclk has no registers set
[ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
[ 0.000000] audiocdclk: no parent clock specified
[ 0.000000] EXYNOS4: PLL settings, A=1500000000, M=800000000, E=96000000 V=350000000
[ 0.000000] EXYNOS4: ARMCLK=1500000000, DMC=400000000, ACLK200=160000000
[ 0.000000] ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimd: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_jpeg: source is mout_jpeg0 (0), rate is 50000000
[ 0.000000] sclk_fimg2d: source is mout_g2d0 (0), rate is 800000000
[ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 50000000
[ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 50000000
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c11bd000 s11776 r8192 d12800 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251394
[ 0.000000] Kernel command line: console=ttySAC0,115200n8 androidboot.console=ttySAC0 lcd=HD700
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 384MB 607MB = 991MB total
[ 0.000000] Memory: 962832k/962832k available, 84720k reserved, 269312K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc076b590 (7566 kB)
[ 0.000000] .init : 0xc076c000 - 0xc079de00 ( 200 kB)
[ 0.000000] .data : 0xc079e000 - 0xc0846ef0 ( 676 kB)
[ 0.000000] .bss : 0xc0846f14 - 0xc08b3470 ( 434 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:549
[ 0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms
[ 0.045000] Calibrating delay loop... 2991.71 BogoMIPS (lpj=7479296)
[ 0.045000] pid_max: default: 32768 minimum: 301
[ 0.045000] Mount-cache hash table entries: 512
[ 0.045000] Initializing cgroup subsys debug
[ 0.045000] Initializing cgroup subsys cpuacct
[ 0.045000] Initializing cgroup subsys freezer
[ 0.045000] CPU: Testing write buffer coherency: ok
[ 0.045000] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
[ 0.045000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.045000] Setting up static identity map for 0x4055a760 - 0x4055a7b8
[ 0.045000] L310 cache controller enabled
[ 0.045000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
[ 0.080000] CPU1: Booted secondary processor
[ 0.100000] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
[ 0.120000] CPU2: Booted secondary processor
[ 0.140000] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
[ 0.160000] CPU3: Booted secondary processor
[ 0.180000] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
[ 0.180000] Brought up 4 CPUs
[ 0.180000] SMP: Total of 4 processors activated (11966.87 BogoMIPS).
[ 0.180000] NET: Registered protocol family 16
[ 0.190000] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.190000] samsung-adc-v3: no platform data supplied
[ 0.190000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.190000] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.195000] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.195000] EXYNOS4x12 PMU Initialize
[ 0.195000] EXYNOS: Initializing architecture
[ 0.195000] s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
[ 0.195000] s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
[ 0.195000] bio: create slab <bio-0> at 0
[ 0.195000] exynos_ion_heap_create: 34
[ 0.195000] exynos_ion_heap_create: 34
[ 0.195000] exynos_ion_heap_create: 34
[ 0.200000] SCSI subsystem initialized
[ 0.200000] usbcore: registered new interface driver usbfs
[ 0.200000] usbcore: registered new interface driver hub
[ 0.200000] usbcore: registered new device driver usb
[ 0.200000] s3c-i2c s3c2440-i2c.0: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-i2c.0: bus frequency set to 195 KHz
[ 0.200000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 0.200000] s3c-i2c s3c2440-i2c.1: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-i2c.1: bus frequency set to 195 KHz
[ 0.200000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 0.200000] s3c-i2c s3c2440-i2c.2: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-i2c.2: bus frequency set to 97 KHz
[ 0.200000] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[ 0.200000] s3c-i2c s3c2440-i2c.3: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-i2c.3: bus frequency set to 195 KHz
[ 0.200000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[ 0.200000] s3c-i2c s3c2440-i2c.7: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-i2c.7: bus frequency set to 195 KHz
[ 0.200000] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[ 0.200000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 390 KHz
[ 0.200000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
[ 0.200000] Linux media interface: v0.10
[ 0.200000] Linux video capture interface: v2.00
[ 0.200000] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.200000] Bluetooth: Core ver 2.16
[ 0.200000] NET: Registered protocol family 31
[ 0.200000] Bluetooth: HCI device and connection manager initialized
[ 0.200000] Bluetooth: HCI socket layer initialized
[ 0.200000] Bluetooth: L2CAP socket layer initialized
[ 0.200000] Bluetooth: SCO socket layer initialized
[ 0.200000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.200000] Switching to clocksource mct-frc
[ 0.205000] NET: Registered protocol family 2
[ 0.205000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.205000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.205000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.205000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.205000] TCP: reno registered
[ 0.205000] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.205000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.205000] NET: Registered protocol family 1
[ 0.205000] Attached IOMMU controller to exynos4-fimc.0 device.
[ 0.205000] Attached IOMMU controller to exynos4-fimc.1 device.
[ 0.205000] Attached IOMMU controller to exynos4-fimc.2 device.
[ 0.205000] Attached IOMMU controller to exynos4-fimc.3 device.
[ 0.205000] Attached IOMMU controller to s5p-mfc-l device.
[ 0.205000] Attached IOMMU controller to s5p-mfc-r device.
[ 0.205000] Attached IOMMU controller to s5p-mixer device.
[ 0.205000] Attached IOMMU controller to s5p-g2d.0 device.
[ 0.205000] Attached IOMMU controller to s5p-jpeg.0 device.
[ 0.205000] platform exynos-fimc-lite.0: No SYSMMU found
[ 0.205000] Attached IOMMU controller to exynos-fimc-lite.0 device.
[ 0.205000] platform exynos-fimc-lite.1: No SYSMMU found
[ 0.205000] Attached IOMMU controller to exynos-fimc-lite.1 device.
[ 0.205000] s3c-adc samsung-adc-v4: attached adc driver
[ 0.205000] Failed to declare coherent memory for MFC device (0 bytes at 0x43000000)
[ 0.210000] highmem bounce pool size: 64 pages
[ 0.210000] fuse init (API version 7.19)
[ 0.210000] msgmni has been set to 1418
[ 0.210000] io scheduler noop registered
[ 0.210000] io scheduler deadline registered
[ 0.210000] io scheduler cfq registered (default)
[ 0.245000] exynos_runtime_resume: exynos_device_sysmmu_fimd0+0x8/0x188
[ 0.245000] s3c-fb exynos4-fb.0: window 0: fb
[ 0.280000] s3c-fb exynos4-fb.0: window 1: fb
[ 0.315000] s3c-fb exynos4-fb.0: window 2: fb
[ 0.350000] s3c-fb exynos4-fb.0: window 3: fb
[ 0.390000] s3c-fb exynos4-fb.0: window 4: fb
[ 0.390000] Start display and show logo
[ 0.395000] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
[ 0.395000] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.395000] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
[ 0.395000] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.395000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.395000] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
[ 1.295000] console [ttySAC0] enabled
[ 1.295000] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
[ 1.305000] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
[ 1.310000] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
[ 1.320000] leds initialized
[ 1.320000] pwm initialized
[ 1.325000] backlight initialized
[ 1.330000] tiny4412-adc initialized
[ 1.335000] Mali: init_mali_clock mali_clock c07c9e64
[ 1.340000] Mali: Mali device driver loaded
[ 1.345000] brd: module loaded
[ 1.345000] loop: module loaded
[ 1.350000] tun: Universal TUN/TAP device driver, 1.6
[ 1.350000] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 1.360000] PPP generic driver version 2.4.2
[ 1.365000] PPP BSD Compression module registered
[ 1.370000] PPP Deflate Compression module registered
[ 1.375000] PPP MPPE Compression module registered
[ 1.375000] NET: Registered protocol family 24
[ 1.380000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 1.390000] usbcore: registered new interface driver pegasus
[ 1.395000] usbcore: registered new interface driver asix
[ 1.400000] usbcore: registered new interface driver cdc_ether
[ 1.405000] usbcore: registered new interface driver dm9601
[ 1.410000] usbcore: registered new interface driver dm9620
[ 1.415000] usbcore: registered new interface driver net1080
[ 1.425000] usbcore: registered new interface driver cdc_subset
[ 1.430000] usbcore: registered new interface driver zaurus
[ 1.435000] usbcore: registered new interface driver cdc_ncm
[ 1.440000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.450000] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[ 1.450000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 1.460000] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
[ 1.475000] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[ 1.475000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.475000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.485000] usb usb1: Product: S5P EHCI Host Controller
[ 1.490000] usb usb1: Manufacturer: Linux 3.5.0-FriendlyARM ehci_hcd
[ 1.495000] usb usb1: SerialNumber: s5p-ehci
[ 1.500000] hub 1-0:1.0: USB hub found
[ 1.505000] hub 1-0:1.0: 3 ports detected
[ 1.505000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.515000] exynos-ohci exynos-ohci: PHY already ON
[ 1.520000] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
[ 1.525000] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
[ 1.530000] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
[ 1.595000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.595000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.595000] usb usb2: Product: EXYNOS OHCI Host Controller
[ 1.595000] usb usb2: Manufacturer: Linux 3.5.0-FriendlyARM ohci_hcd
[ 1.600000] usb usb2: SerialNumber: exynos-ohci
[ 1.605000] hub 2-0:1.0: USB hub found
[ 1.610000] hub 2-0:1.0: 3 ports detected
[ 1.610000] Initializing USB Mass Storage driver...
[ 1.615000] usbcore: registered new interface driver usb-storage
[ 1.625000] USB Mass Storage support registered.
[ 1.630000] usbcore: registered new interface driver usbserial
[ 1.635000] usbcore: registered new interface driver usbserial_generic
[ 1.640000] USB Serial support registered for generic
[ 1.645000] usbserial: USB Serial Driver core
[ 1.650000] usbcore: registered new interface driver aircable
[ 1.655000] USB Serial support registered for aircable
[ 1.660000] usbcore: registered new interface driver ark3116
[ 1.665000] USB Serial support registered for ark3116
[ 1.670000] usbcore: registered new interface driver belkin_sa
[ 1.675000] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 1.685000] usbcore: registered new interface driver ch341
[ 1.690000] USB Serial support registered for ch341-uart
[ 1.695000] usbcore: registered new interface driver cp210x
[ 1.700000] USB Serial support registered for cp210x
[ 1.705000] usbcore: registered new interface driver cyberjack
[ 1.710000] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[ 1.720000] usbcore: registered new interface driver cypress_m8
[ 1.725000] USB Serial support registered for DeLorme Earthmate USB
[ 1.730000] USB Serial support registered for HID->COM RS232 Adapter
[ 1.740000] USB Serial support registered for Nokia CA-42 V2 Adapter
[ 1.745000] usbcore: registered new interface driver digi_acceleport
[ 1.750000] USB Serial support registered for Digi 2 port USB adapter
[ 1.755000] USB Serial support registered for Digi 4 port USB adapter
[ 1.765000] usbcore: registered new interface driver io_edgeport
[ 1.770000] USB Serial support registered for Edgeport 2 port adapter
[ 1.775000] USB Serial support registered for Edgeport 4 port adapter
[ 1.785000] USB Serial support registered for Edgeport 8 port adapter
[ 1.790000] USB Serial support registered for EPiC device
[ 1.795000] usbcore: registered new interface driver io_ti
[ 1.800000] USB Serial support registered for Edgeport TI 1 port adapter
[ 1.805000] USB Serial support registered for Edgeport TI 2 port adapter
[ 1.815000] usb 1-2: new high-speed USB device number 2 using s5p-ehci
[ 1.820000] usbcore: registered new interface driver empeg
[ 1.825000] USB Serial support registered for empeg
[ 1.830000] usbcore: registered new interface driver f81232
[ 1.835000] USB Serial support registered for f81232
[ 1.840000] usbcore: registered new interface driver ftdi_sio
[ 1.845000] USB Serial support registered for FTDI USB Serial Device
[ 1.855000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 1.860000] usbcore: registered new interface driver funsoft
[ 1.865000] USB Serial support registered for funsoft
[ 1.870000] usbcore: registered new interface driver garmin_gps
[ 1.875000] USB Serial support registered for Garmin GPS usb/tty
[ 1.880000] usbcore: registered new interface driver hp4x
[ 1.885000] USB Serial support registered for hp4X
[ 1.890000] usbcore: registered new interface driver ipaq
[ 1.895000] USB Serial support registered for PocketPC PDA
[ 1.900000] usbcore: registered new interface driver ipw
[ 1.905000] USB Serial support registered for IPWireless converter
[ 1.915000] usbcore: registered new interface driver ir_usb
[ 1.920000] USB Serial support registered for IR Dongle
[ 1.925000] ir_usb: v0.5:USB IR Dongle driver
[ 1.930000] usbcore: registered new interface driver iuu_phoenix
[ 1.935000] USB Serial support registered for iuu_phoenix
[ 1.940000] usbcore: registered new interface driver keyspan
[ 1.945000] USB Serial support registered for Keyspan - (without firmware)
[ 1.950000] USB Serial support registered for Keyspan 1 port adapter
[ 1.960000] USB Serial support registered for Keyspan 2 port adapter
[ 1.965000] usb 1-2: New USB device found, idVendor=0424, idProduct=2640
[ 1.965000] USB Serial support registered for Keyspan 4 port adapter
[ 1.965000] usbcore: registered new interface driver keyspan_pda
[ 1.965000] USB Serial support registered for Keyspan PDA
[ 1.965000] USB Serial support registered for Keyspan PDA - (prerenumeration)
[ 1.965000] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[ 1.965000] usbcore: registered new interface driver kl5kusb105
[ 1.965000] USB Serial support registered for KL5KUSB105D / PalmConnect
[ 1.965000] usbcore: registered new interface driver kobil_sct
[ 1.965000] USB Serial support registered for KOBIL USB smart card terminal
[ 1.965000] usbcore: registered new interface driver mct_u232
[ 1.965000] USB Serial support registered for MCT U232
[ 1.965000] usbcore: registered new interface driver metro_usb
[ 1.965000] USB Serial support registered for Metrologic USB to Serial
[ 1.965000] usbcore: registered new interface driver mos7720
[ 1.965000] USB Serial support registered for Moschip 2 port adapter
[ 1.965000] usbcore: registered new interface driver mos7840
[ 1.965000] USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[ 1.965000] usbcore: registered new interface driver moto_modem
[ 1.965000] USB Serial support registered for moto-modem
[ 1.965000] usbcore: registered new interface driver navman
[ 1.965000] USB Serial support registered for navman
[ 1.965000] usbcore: registered new interface driver omninet
[ 1.965000] USB Serial support registered for ZyXEL - omni.net lcd plus usb
[ 1.965000] usbcore: registered new interface driver opticon
[ 1.965000] USB Serial support registered for opticon
[ 1.965000] usbcore: registered new interface driver option
[ 1.965000] USB Serial support registered for GSM modem (1-port)
[ 1.965000] usbcore: registered new interface driver oti6858
[ 1.965000] USB Serial support registered for oti6858
[ 1.965000] usbcore: registered new interface driver pl2303
[ 1.965000] USB Serial support registered for pl2303
[ 1.965000] usbcore: registered new interface driver qcaux
[ 1.965000] USB Serial support registered for qcaux
[ 1.965000] usbcore: registered new interface driver qcserial
[ 1.965000] USB Serial support registered for Qualcomm USB modem
[ 1.965000] usbcore: registered new interface driver quatech2
[ 1.965000] USB Serial support registered for Quatech 2nd gen USB to Serial Driver
[ 1.965000] safe_serial: v0.1:USB Safe Encapsulated Serial
[ 1.965000] usbcore: registered new interface driver safe_serial
[ 1.965000] USB Serial support registered for safe_serial
[ 1.965000] usbcore: registered new interface driver siemens_mpi
[ 1.965000] USB Serial support registered for siemens_mpi
[ 1.965000] usbcore: registered new interface driver sierra
[ 1.965000] USB Serial support registered for Sierra USB modem
[ 1.965000] usbcore: registered new interface driver spcp8x5
[ 1.965000] USB Serial support registered for SPCP8x5
[ 1.965000] usbcore: registered new interface driver ssu100
[ 1.965000] USB Serial support registered for Quatech SSU-100 USB to Serial Driver
[ 1.965000] usbcore: registered new interface driver symbolserial
[ 1.965000] USB Serial support registered for symbol
[ 1.965000] usbcore: registered new interface driver ti_usb_3410_5052
[ 1.965000] USB Serial support registered for TI USB 3410 1 port adapter
[ 1.965000] USB Serial support registered for TI USB 5052 2 port adapter
[ 1.965000] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
[ 1.965000] usbcore: registered new interface driver visor
[ 1.965000] USB Serial support registered for Handspring Visor / Palm OS
[ 1.965000] USB Serial support registered for Sony Clie 5.0
[ 1.965000] USB Serial support registered for Sony Clie 3.5
[ 1.965000] usbcore: registered new interface driver whiteheat
[ 1.965000] USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[ 1.965000] USB Serial support registered for Connect Tech - WhiteHEAT
[ 1.965000] usbcore: registered new interface driver vivopay_serial
[ 1.965000] USB Serial support registered for vivopay-serial
[ 1.965000] usbcore: registered new interface driver zio
[ 1.965000] USB Serial support registered for zio
[ 1.965000] s3c-hsotg s3c-hsotg: regs f0c40000, irq 103
[ 1.965000] s3c-hsotg s3c-hsotg: PHY already ON
[ 1.965000] s3c-hsotg s3c-hsotg: EPs:15
[ 1.965000] s3c-hsotg s3c-hsotg: dedicated fifos
[ 1.965000] s3c-hsotg s3c-hsotg: still being used
[ 1.970000] gadget: Mass Storage Function, version: 2009/09/11
[ 1.970000] gadget: Number of LUNs=1
[ 1.970000] lun0: LUN: removable file: (no medium)
[ 1.970000] gadget: android_usb ready
[ 1.970000] s3c-hsotg s3c-hsotg: bound driver android_usb
[ 1.970000] s3c-hsotg s3c-hsotg: PHY already ON
[ 1.970000] s3c-hsotg s3c-hsotg: s3c_hsotg_irq: USBRst
[ 1.970000] s3c-hsotg s3c-hsotg: still being used
[ 1.970000] mousedev: PS/2 mouse device common for all mice
[ 1.970000] usbcore: registered new interface driver xpad
[ 1.970000] input: ft5x0x_ts as /devices/virtual/input/input0
[ 1.980000] ft5x0x_ts 1-0038: Firmware version 0x01
[ 1.980000] ft5x0x_ts 1-0038: FocalTech ft5x0x TouchScreen initialized
[ 1.980000] touchscreen-1wire initialized
[ 1.980000] backlight-1wire initialized
[ 1.980000] setup_irq: ret = 0
[ 1.980000] PWM clock = 100000000
[ 1.980000] TCNT_FOR_SAMPLE_BIT = 650, TCFG1 = 00010004
[ 1.980000] input: fa_ts_input as /devices/virtual/input/input1
[ 1.980000] ts-if initialized
[ 1.980000] wake enabled for irq 442
[ 1.980000] wake enabled for irq 443
[ 1.980000] wake enabled for irq 444
[ 1.980000] wake enabled for irq 445
[ 1.980000] GPIO Input Driver: Start gpio inputs for tiny4412-key in interrupt mode
[ 1.980000] input: tiny4412-key as /devices/virtual/input/input2
[ 1.980000] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 1.980000] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[ 1.980000] i2c /dev entries driver
[ 1.980000] exynos_runtime_resume: exynos_device_sysmmu_fimc0+0x8/0x188
[ 1.980000] exynos_runtime_suspend: exynos_device_sysmmu_fimc0+0x8/0x188
[ 1.980000] exynos_runtime_resume: exynos_device_sysmmu_fimc1+0x8/0x188
[ 1.980000] exynos_runtime_suspend: exynos_device_sysmmu_fimc1+0x8/0x188
[ 1.980000] exynos_runtime_resume: exynos_device_sysmmu_fimc2+0x8/0x188
[ 1.980000] exynos_runtime_suspend: exynos_device_sysmmu_fimc2+0x8/0x188
[ 1.980000] exynos_runtime_resume: exynos_device_sysmmu_fimc3+0x8/0x188
[ 1.980000] exynos_runtime_suspend: exynos_device_sysmmu_fimc3+0x8/0x188
[ 2.010000] FIMC-IS probe completed
[ 2.010000] [INFO]flite_probe:754: fimc-lite0 probe success
[ 2.010000] [INFO]flite_probe:754: fimc-lite1 probe success
[ 2.010000] s5p-fimc-md: Registered fimc.0.m2m as /dev/video0
[ 2.010000] s5p-fimc-md: Registered fimc.0.capture as /dev/video1
[ 2.010000] s5p-fimc-md: Registered fimc.1.m2m as /dev/video2
[ 2.010000] s5p-fimc-md: Registered fimc.1.capture as /dev/video3
[ 2.010000] s5p-fimc-md: Registered fimc.2.m2m as /dev/video4
[ 2.010000] s5p-fimc-md: Registered fimc.2.capture as /dev/video5
[ 2.010000] s5p-fimc-md: Registered fimc.3.m2m as /dev/video6
[ 2.010000] s5p-fimc-md: Registered fimc.3.capture as /dev/video7
[ 2.010000] s5p-mfc s5p-mfc: decoder registered as /dev/video8
[ 2.010000] s5p-mfc s5p-mfc: encoder registered as /dev/video9
[ 2.010000] HDMI unplugged
[ 2.010000] s5p-hdmiphy 8-0038: probe successful
[ 2.015000] s5p-hdmi exynos4-hdmi: probe successful
[ 2.015000] i2c i2c-7: attached s5p_ddc into i2c adapter successfully
[ 2.015000] i2c-core: driver [s5p_ddc] using legacy suspend method
[ 2.015000] i2c-core: driver [s5p_ddc] using legacy resume method
[ 2.015000] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
[ 2.015000] s5p-mixer s5p-mixer: probe start
[ 2.015000] s5p-mixer s5p-mixer: resources acquired
[ 2.015000] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
[ 2.015000] s5p-mixer s5p-mixer: module s5p-sdo is missing
[ 2.015000] s5p-mixer s5p-mixer: registered layer graph0 as /dev/video10
[ 2.015000] s5p-mixer s5p-mixer: registered layer graph1 as /dev/video11
[ 2.015000] s5p-mixer s5p-mixer: registered layer video0 as /dev/video12
[ 2.015000] s5p-mixer s5p-mixer: probe successful
[ 2.015000] s5p-g2d s5p-g2d.0: device registered as /dev/video13
[ 2.015000] Initialize JPEG driver
[ 2.015000] s5p-jpeg s5p-jpeg.0: JPEG driver is registered to /dev/video14
[ 2.015000] samsung-fake-battery samsung-fake-battery: samsung_fake_bat_probe
[ 2.055000] input: mma7660 as /devices/platform/s3c2440-i2c.3/i2c-3/3-004c/input/input3
[ 2.055000] mma7660 3-004c: MMA7660 device is probed successfully.
[ 2.055000] i2c-core: driver [mma7660] using legacy suspend method
[ 2.055000] i2c-core: driver [mma7660] using legacy resume method
[ 2.055000] MMA7660 sensor driver registered.
[ 2.060000] Exynos: Kernel Thermal management registered
[ 2.060000] s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[ 2.060000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq disabled
[ 2.060000] device-mapper: uevent: version 1.0.3
[ 2.060000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-devel@redhat.com[ 2.060000] Bluetooth: Virtual HCI driver ver 1.3
[ 2.060000] Bluetooth: HCI UART driver ver 2.2
[ 2.060000] Bluetooth: HCI H4 protocol initialized
[ 2.060000] Bluetooth: HCI BCSP protocol initialized
[ 2.060000] Bluetooth: HCILL protocol initialized
[ 2.060000] usbcore: registered new interface driver bcm203x
[ 2.060000] usbcore: registered new interface driver bpa10x
[ 2.060000] usbcore: registered new interface driver bfusb
[ 2.060000] usbcore: registered new interface driver btusb
[ 2.060000] cpuidle: using governor ladder
[ 2.865000] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.865000] cpuidle: using governor menu
[ 2.865000] sdhci: Secure Digital Host Controller Interface driver
[ 2.865000] sdhci: Copyright(c) Pierre Ossman
[ 2.865000] Front
[ 2.865000] Synopsys Designware Multimedia Card Interface Driver
[ 2.890000] dw_mmc dw_mmc: Using internal DMA controller.
[ 2.890000] hub 1-2:1.0: USB hub found
[ 2.890000] hub 1-2:1.0: 3 ports detected
[ 2.940000] dw_mmc dw_mmc: Version ID is 240a
[ 2.940000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.940000] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
[ 2.940000] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (100000000 Hz)
[ 2.975000] mmc1: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
[ 2.975000] s3c-sdhci exynos4-sdhci.3: clock source 2: mmc_busclk.2 (100000000 Hz)
[ 2.980000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[ 2.980000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[ 2.985000] mmc0: new high speed DDR MMC card at address 0001
[ 2.990000] mmcblk0: mmc0:0001 M8G1WA 7.28 GiB
[ 2.995000] mmcblk0boot0: mmc0:0001 M8G1WA partition 1 2.00 MiB
[ 3.000000] mmcblk0boot1: mmc0:0001 M8G1WA partition 2 2.00 MiB
[ 3.005000] mmc2: SDHCI controller on samsung-hsmmc [exynos4-sdhci.3] using ADMA
[ 3.005000] usbcore: registered new interface driver usbhid
[ 3.005000] usbhid: USB HID core driver
[ 3.025000] ashmem: initialized
[ 3.025000] mmcblk0: p1 p2 p3 p4
[ 3.025000] mmcblk0boot1: unknown partition table
[ 3.025000] mmcblk0boot0: unknown partition table
[ 3.040000] logger: created 256K log 'log_main'
[ 3.045000] logger: created 256K log 'log_events'
[ 3.050000] logger: created 256K log 'log_radio'
[ 3.055000] logger: created 256K log 'log_system'
[ 3.060000] Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
[ 3.065000] audss_init: RCLK SRC[busclk]
[ 3.065000] mmc1: new high speed SDHC card at address 1234
[ 3.065000] mmcblk1: mmc1:1234 SA08G 7.28 GiB
[ 3.070000] mmcblk1: p1
[ 3.080000] Samsung SRP driver, (c)2011 Samsung Electronics
[ 3.090000] GACT probability NOT on
[ 3.090000] Mirror/redirect action on
[ 3.095000] u32 classifier
[ 3.095000] Actions configured
[ 3.100000] Netfilter messages via NETLINK v0.30.
[ 3.105000] nf_conntrack version 0.5.0 (15556 buckets, 62224 max)
[ 3.110000] ctnetlink v0.93: registering with nfnetlink.
[ 3.115000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 3.125000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 3.130000] xt_time: kernel timezone is -0000
[ 3.135000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.140000] arp_tables: (C) 2002 David S. Miller
[ 3.145000] TCP: cubic registered
[ 3.145000] Initializing XFRM netlink socket
[ 3.150000] NET: Registered protocol family 10
[ 3.155000] mip6: Mobile IPv6
[ 3.160000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.165000] sit: IPv6 over IPv4 tunneling driver
[ 3.170000] NET: Registered protocol family 17
[ 3.170000] NET: Registered protocol family 15
[ 3.175000] Bluetooth: RFCOMM TTY layer initialized
[ 3.180000] Bluetooth: RFCOMM socket layer initialized
[ 3.185000] usb 1-2.1: new high-speed USB device number 3 using s5p-ehci
[ 3.195000] Bluetooth: RFCOMM ver 1.11
[ 3.195000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.200000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.210000] NET: Registered protocol family 35
[ 3.215000] EXYNOS4X12: Adaptive Support Voltage init
[ 3.220000] EXYNOS4X12(SG): ORIG : 2 MOD : 0 RESULT : 2
[ 3.225000] EXYNOS: Fail to get HPM Value
[ 3.225000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 3.235000] ThumbEE CPU extension supported.
[ 3.240000] Registering SWP/SWPB emulation handler
[ 3.245000] [ 6 ] Memory Type Undertermined.
[ 3.250000] DVFS : VDD_INT Voltage table set with 0 Group
[ 3.280000] Failed to init busfreq.
[ 3.280000] otg_wakelock_init: No USB transceiver found
[ 3.280000] s3c-rtc s3c64xx-rtc: setting system clock to 2013-08-29 01:45:30 UTC (1377740730)
[ 3.280000] cpufreq_interactive_input_connect: connect to ft5x0x_ts
[ 3.280000] cpufreq_interactive_input_connect: connect to fa_ts_input
[ 3.285000] hotplug_policy_init: intialised with policy : DVFS_NR_BASED_HOTPLUG
[ 3.290000] ALSA device list:
[ 3.295000] usb 1-2.1: New USB device found, idVendor=0424, idProduct=4040
[ 3.295000] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.295000] usb 1-2.1: Product: Ultra Fast Media Reader
[ 3.295000] usb 1-2.1: Manufacturer: Generic
[ 3.295000] usb 1-2.1: SerialNumber: 000000264001
[ 3.295000] scsi0 : usb-storage 1-2.1:1.0
[ 3.330000] No soundcards found.
[ 3.330000] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[ 3.340000] Please append a correct "root=" boot option; here are the available partitions:
[ 3.345000] b300 7634944 mmcblk0 driver: mmcblk
[ 3.350000] b301 5799139 mmcblk0p1 00000000-0000-0000-0000-000000000000
[ 3.360000] b302 328394 mmcblk0p2 00000000-0000-0000-0000-000000000000
[ 3.365000] b303 828448 mmcblk0p3 00000000-0000-0000-0000-000000000000
[ 3.375000] b304 537372 mmcblk0p4 00000000-0000-0000-0000-000000000000
[ 3.380000] b310 2048 mmcblk0boot1 [ 3.385000] usb 1-2.2: new full-speed USB device number 4 using s5p-ehci
(driver?)
[ 3.395000] b308 2048 mmcblk0boot0 (driver?)
[ 3.400000] b318 7639040 mmcblk1 driver: mmcblk
[ 3.405000] b319 7484416 mmcblk1p1 00000000-0000-0000-0000-000000000000
[ 3.410000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 3.420000] [<c00153e0>] (unwind_backtrace+0x0/0xf0) from [<c05570ec>] (panic+0x88/0x1e4)
[ 3.430000] [<c05570ec>] (panic+0x88/0x1e4) from [<c076ccc0>] (mount_block_root+0x1d8/0x29c)
[ 3.435000] [<c076ccc0>] (mount_block_root+0x1d8/0x29c) from [<c076d034>] (prepare_namespace+0x160/0x1b8)
[ 3.445000] [<c076d034>] (prepare_namespace+0x160/0x1b8) from [<c076c998>] (kernel_init+0x180/0x1cc)
[ 3.455000] [<c076c998>] (kernel_init+0x180/0x1cc) from [<c000f598>] (kernel_thread_exit+0x0/0x8)
[ 3.465000] CPU0: stopping
[ 3.465000] [<c00153e0>] (unwind_backtrace+0x0/0xf0) from [<c0013cd4>] (handle_IPI+0x18c/0x1c0)
[ 3.475000] [<c0013cd4>] (handle_IPI+0x18c/0x1c0) from [<c0008514>] (gic_handle_irq+0x60/0x68)
[ 3.485000] [<c0008514>] (gic_handle_irq+0x60/0x68) from [<c000e040>] (__irq_svc+0x40/0x70)
[ 3.495000] Exception stack(0xc079ff08 to 0xc079ff50)
[ 3.500000] ff00: c079ff50 00000000 cea425ad 00000000 ce886295 00000000
[ 3.505000] ff20: c11bd358 c079ff50 00000000 c07ce04c 00000000 c0845acc 3b9aca00 c079ff50
[ 3.515000] ff40: c006c0d8 c0394970 90000013 ffffffff
[ 3.520000] [<c000e040>] (__irq_svc+0x40/0x70) from [<c0394970>] (cpuidle_wrap_enter+0x4c/0xa0)
[ 3.530000] [<c0394970>] (cpuidle_wrap_enter+0x4c/0xa0) from [<c0394598>] (cpuidle_idle_call+0xdc/0x360)
[ 3.535000] [<c0394598>] (cpuidle_idle_call+0xdc/0x360) from [<c000f9c8>] (cpu_idle+0xcc/0x120)
[ 3.545000] [<c000f9c8>] (cpu_idle+0xcc/0x120) from [<c076c7c4>] (start_kernel+0x2c8/0x31c)
[ 3.555000] [<c076c7c4>] (start_kernel+0x2c8/0x31c) from [<40008044>] (0x40008044)
[ 3.560000] CPU1: stopping
[ 3.565000] [<c00153e0>] (unwind_backtrace+0x0/0xf0) from [<c0013cd4>] (handle_IPI+0x18c/0x1c0)
[ 3.575000] [<c0013cd4>] (handle_IPI+0x18c/0x1c0) from [<c0008514>] (gic_handle_irq+0x60/0x68)
[ 3.580000] [<c0008514>] (gic_handle_irq+0x60/0x68) from [<c000e040>] (__irq_svc+0x40/0x70)
[ 3.580000] Exception stack(0xed061f38 to 0xed061f80)
[ 3.580000] 1f20: ed061f80 00000000
[ 3.580000] 1f40: cea4274e 00000000 cb8e9542 00000000 c11c5358 ed061f80 00000000 c07ce04c
[ 3.580000] 1f60: 00000000 c0845acc 3b9aca00 ed061f80 c006c0d8 c0394970 90000013 ffffffff
[ 3.580000] [<c000e040>] (__irq_svc+0x40/0x70) from [<c0394970>] (cpuidle_wrap_enter+0x4c/0xa0)
[ 3.580000] [<c0394970>] (cpuidle_wrap_enter+0x4c/0xa0) from [<c0394598>] (cpuidle_idle_call+0xdc/0x360)
[ 3.580000] [<c0394598>] (cpuidle_idle_call+0xdc/0x360) from [<c000f9c8>] (cpu_idle+0xcc/0x120)
[ 3.580000] [<c000f9c8>] (cpu_idle+0xcc/0x120) from [<40554014>] (0x40554014)
[ 3.580000] CPU2: stopping
[ 3.580000] [<c00153e0>] (unwind_backtrace+0x0/0xf0) from [<c0013cd4>] (handle_IPI+0x18c/0x1c0)
[ 3.580000] [<c0013cd4>] (handle_IPI+0x18c/0x1c0) from [<c0008514>] (gic_handle_irq+0x60/0x68)
[ 3.580000] [<c0008514>] (gic_handle_irq+0x60/0x68) from [<c000e040>] (__irq_svc+0x40/0x70)
[ 3.580000] Exception stack(0xed063f38 to 0xed063f80)
[ 3.580000] 3f20: ed063f80 00000000
[ 3.580000] 3f40: cea426a7 00000000 cb8e93a1 00000000 c11cd358 ed063f80 00000000 c07ce04c
[ 3.580000] 3f60: 00000000 c0845acc 3b9aca00 ed063f80 c006c0d8 c0394970 90000013 ffffffff
[ 3.580000] [<c000e040>] (__irq_svc+0x40/0x70) from [<c0394970>] (cpuidle_wrap_enter+0x4c/0xa0)
[ 3.580000] [<c0394970>] (cpuidle_wrap_enter+0x4c/0xa0) from [<c0394598>] (cpuidle_idle_call+0xdc/0x360)
[ 3.580000] [<c0394598>] (cpuidle_idle_call+0xdc/0x360) from [<c000f9c8>] (cpu_idle+0xcc/0x120)
[ 3.580000] [<c000f9c8>] (cpu_idle+0xcc/0x120) from [<40554014>] (0x40554014)
