文件系统用的是友善光盘里提供的rootfs_android4.0.3文件系统，内核是Linux-3.0.8确定不是是nfs的问题，因为挂载Linux文件系统是没有问题的，但是挂载android文件系统时候端口输出显示 nfs: server 202.117.177.90 notresponding, still trying 显示器一直在显示： ANDROID FriendlyARM MINI210 Booting ... 过一会就黑屏了请教各位大神，这是不是没有挂载成功啊？什么原因呢？下面是uboot的环境设置：
bootargs=root=/dev/nfsnfsroot=202.117.177.90:/home/zhangyl/root,flags=intr,tcp,nolock,rsize=1024,wsize=1024ip=202.117.177.100:202.117.177.90:202.117.177.90:255.255.255.0::eth0:off rwconsole=ttySAC0,115200 init=/linuxrc androidboot.console=ttySAC0 skipcali=yesctp=2
下面是启动过程端口输出：
NAND read: device 0 offset 0x600000, size 0x500000 5242880 bytes read: OK## Booting kernel from Legacy Image at20000000 ... Image Name: linux-3.0.8 Image Type: ARM Linux Kernel Image(uncompressed) Data Size: 4120236 Bytes =3.9 MiB Load Address: 21000000 Entry Point: 21000000 Verifying Checksum ... OK Loading Kernel Image ... OKOK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.[ 0.000000] Initializingcgroup subsys cpu[ 0.000000] Linux version3.0.8-linux308zyl (zhangyl@ubuntu) (gcc version 4.5.1 (ctng-1.8.1-FA) ) #1PREEMPT Mon Apr 13 16:08:17 CST 2015[ 0.000000] CPU: ARMv7Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f[ 0.000000] CPU: VIPTnonaliasing data cache, VIPT aliasing instruction cache[ 0.000000] Machine: MINI210[ 0.000000] Memory policy: ECC disabled, Data cache writeback[ 0.000000] CPUS5PV210/S5PC110 (id 0x43110220)[ 0.000000] S3C24XX Clocks,Copyright 2004 Simtec Electronics[ 0.000000] S5PV210: PLLsettings, A=1000000000, M=667000000, E=80000000 V=54000000[ 0.000000] S5PV210:ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000[ 0.000000] HCLKP=133400000,PCLKM=100000000, PCLKD=83375000, PCLKP=66700000[ 0.000000] sclk_dmc: sourceis sclk_a2m (0), rate is 200000000[ 0.000000] sclk_onenand:source is hclk_dsys (1), rate is 166750000[ 0.000000] uclk1: source ismout_mpll (6), rate is 66700000[ 0.000000] uclk1: source ismout_mpll (6), rate is 66700000[ 0.000000] uclk1: source ismout_mpll (6), rate is 66700000[ 0.000000] uclk1: source ismout_mpll (6), rate is 66700000[ 0.000000] sclk_mixer:source is sclk_dac (0), rate is 54000000[ 0.000000] sclk_fimc: sourceis ext_xtal (0), rate is 24000000[ 0.000000] sclk_fimc: sourceis ext_xtal (0), rate is 24000000[ 0.000000] sclk_fimc: sourceis ext_xtal (0), rate is 24000000[ 0.000000] sclk_cam0: sourceis ext_xtal (0), rate is 24000000[ 0.000000] sclk_cam1: sourceis ext_xtal (0), rate is 24000000[ 0.000000] sclk_fimd: sourceis ext_xtal (0), rate is 24000000[ 0.000000] sclk_mmc: sourceis mout_mpll (6), rate is 47642857[ 0.000000] sclk_mmc: sourceis mout_mpll (6), rate is 47642857[ 0.000000] sclk_mmc: sourceis mout_epll (7), rate is 80000000[ 0.000000] sclk_mmc: sourceis mout_epll (7), rate is 80000000[ 0.000000] sclk_mfc: sourceis sclk_a2m (0), rate is 200000000[ 0.000000] sclk_g2d: sourceis sclk_a2m (0), rate is 200000000[ 0.000000] sclk_g3d: sourceis sclk_a2m (0), rate is 200000000[ 0.000000] sclk_csis: sourceis ext_xtal (0), rate is 24000000[ 0.000000] sclk_spi: sourceis ext_xtal (0), rate is 24000000[ 0.000000] sclk_spi: sourceis ext_xtal (0), rate is 24000000[ 0.000000] sclk_pwi: sourceis ext_xtal (0), rate is 24000000[ 0.000000] sclk_pwm: sourceis ext_xtal (0), rate is 24000000[ 0.000000] s5p: 36864 kbytessystem memory reserved for mfc at 0x3dbf6000, 0-bank base(0x3dbf6000)[ 0.000000] s5p: 36864 kbytessystem memory reserved for mfc at 0x3b7f6000, 1-bank base(0x00000000)[ 0.000000] s5p: 6144 kbytessystem memory reserved for fimc0 at 0x3b1f6000, 1-bank base(0x00000000)[ 0.000000] s5p: 16 kbytessystem memory reserved for fimc1 at 0x3b1f2000, 1-bank base(0x00000000)[ 0.000000] s5p: 6144 kbytessystem memory reserved for fimc2 at 0x3abf2000, 1-bank base(0x00000000)[ 0.000000] s5p: 8192 kbytessystem memory reserved for jpeg at 0x3a3f2000, 0-bank base(0x3a3f2000)[ 0.000000] s5p: 13060 kbytessystem memory reserved for fimd at 0x39731000, 1-bank base(0x00000000)[ 0.000000] s5p: 8192 kbytessystem memory reserved for g2d at 0x38f31000, 0-bank base(0x38f31000)[ 0.000000] Built 1 zonelistsin Zone order, mobility grouping on. Total pages: 101179[ 0.000000] Kernel commandline: root=/dev/nfs nfsroot=202.117.177.90:/home/zhangyl/root,flags=intr,tcp,nolock,rsize=1024,wsize=1024 ip=202.117.177.100:202.117.177.90:202.117.177.90:255.255.255.0::eth0:offrw console=ttySAC0,115200 init=/linuxrc androidboot.console=ttySAC0skipcali=yes ctp=2[ 0.000000] PID hash tableentries: 2048 (order: 1, 8192 bytes)[ 0.000000] Dentry cache hashtable entries: 65536 (order: 6, 262144 bytes)[ 0.000000] Inode-cache hashtable entries: 32768 (order: 5, 131072 bytes)[ 0.000000] Memory: 399MB 0MB= 399MB total[ 0.000000] Memory:395856k/511332k available, 12956k reserved, 0K highmem[ 0.000000] Virtual kernelmemory layout:[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)[ 0.000000] vmalloc : 0xe0800000 - 0xfd000000 ( 456 MB)[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)[ 0.000000] .init : 0xc0008000 - 0xc0037000 ( 188 kB)[ 0.000000] .text : 0xc0037000 - 0xc0790f64 (7528 kB)[ 0.000000] .data : 0xc0792000 - 0xc07e89c0 ( 347 kB)[ 0.000000] .bss : 0xc07e89e4 - 0xc082dee0 ( 278 kB)[ 0.000000] SLUB:Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1[ 0.000000] Preemptiblehierarchical RCU implementation.[ 0.000000] NR_IRQS:393[ 0.000000] VIC @fd000000: id0x00041192, vendor 0x41[ 0.000000] VIC @fd010000: id0x00041192, vendor 0x41[ 0.000000] VIC @fd020000: id0x00041192, vendor 0x41[ 0.000000] VIC @fd030000: id0x00041192, vendor 0x41[ 0.000000] sched_clock: 32bits at 33MHz, resolution 29ns, wraps every 128784ms[ 0.000000] Console: colourdummy device 80x30[ 0.000000] console [ttySAC0]enabled[ 0.443575] Calibrating delayloop... 997.78 BogoMIPS (lpj=2494464)[ 0.474996] pid_max: default:32768 minimum: 301[ 0.475163] Mount-cache hashtable entries: 512[ 0.475508] Initializingcgroup subsys debug[ 0.475551] Initializingcgroup subsys cpuacct[ 0.475596] Initializingcgroup subsys freezer[ 0.477593] CPU: Testingwrite buffer coherency: ok[ 0.485243]print_constraints: dummy: [ 0.486280] NET: Registeredprotocol family 16[ 0.495869] S3C PowerManagement, Copyright 2004 Simtec Electronics[ 0.502386] fimd at0x39731000[ 0.502470] hsmmc0: sclk_mmc: source is mout_mpll, rateis 47642857[ 0.506129] hsmmc1: sclk_mmc:source is mout_mpll, rate is 47642857[ 0.512419] hsmmc2: sclk_mmc:source is mout_mpll, rate is 47642857[ 0.518590] hsmmc3: sclk_mmc:source is mout_mpll, rate is 47642857[ 0.525633] S5PV210:Initializing architecture[ 0.529877] s3c-adcs5pv210-adc: attached adc driver[ 0.534340] s3c24xx-pwms3c24xx-pwm.0: tin at 33350000, tdiv at 33350000, tin=divclk, base 0[ 0.542979]print_constraints: pd_tv_supply: 5000 mV normal [ 0.548380]print_constraints: pd_lcd_supply: 5000 mV normal [ 0.554099]print_constraints: pd_g3d_supply: 5000 mV normal [ 0.559799]print_constraints: pd_mfc_supply: 5000 mV normal [ 0.565524]print_constraints: pd_audio_supply: 5000 mV normal [ 0.602991] bio: create slab<bio-0> at 0[ 0.604003] SCSI subsysteminitialized[ 0.605895] usbcore:registered new interface driver usbfs[ 0.606197] usbcore:registered new interface driver hub[ 0.606395] usbcore:registered new device driver usb[ 0.606950] s3c-i2cs3c2440-i2c.0: slave address 0x10[ 0.609246] s3c-i2cs3c2440-i2c.0: bus frequency set to 378 KHz[ 0.616020] s3c-i2cs3c2440-i2c.0: i2c-0: S3C I2C adapter[ 0.620581] s3c-i2cs3c2440-i2c.1: slave address 0x10[ 0.625565] s3c-i2cs3c2440-i2c.1: bus frequency set to 65 KHz[ 0.631611] s3c-i2cs3c2440-i2c.1: i2c-1: S3C I2C adapter[ 0.636778] s3c-i2cs3c2440-i2c.2: slave address 0x10[ 0.641761] s3c-i2cs3c2440-i2c.2: bus frequency set to 378 KHz[ 0.648017] s3c-i2cs3c2440-i2c.2: i2c-2: S3C I2C adapter[ 0.653579] Advanced LinuxSound Architecture Driver Version 1.0.24.[ 0.659899] Bluetooth: Corever 2.16[ 0.663039] NET: Registeredprotocol family 31[ 0.667347] Bluetooth: HCIdevice and connection manager initialized[ 0.673653] Bluetooth: HCIsocket layer initialized[ 0.678495] Bluetooth: L2CAPsocket layer initialized[ 0.683519] Bluetooth: SCOsocket layer initialized[ 0.688610] Switching toclocksource s5p_clocksource_timer[ 0.694993] Switched to NOHzmode on CPU #0[ 0.708415] NET: Registeredprotocol family 2[ 0.708607] IP route cachehash table entries: 4096 (order: 2, 16384 bytes)[ 0.710269] TCP establishedhash table entries: 16384 (order: 5, 131072 bytes)[ 0.716727] TCP bind hashtable entries: 16384 (order: 6, 327680 bytes)[ 0.723341] TCP: Hash tablesconfigured (established 16384 bind 16384)[ 0.729542] TCP renoregistered[ 0.732646] UDP hash tableentries: 256 (order: 1, 12288 bytes)[ 0.738564] UDP-Lite hashtable entries: 256 (order: 1, 12288 bytes)[ 0.745087] NET: Registered protocolfamily 1[ 0.749459] RPC: Registerednamed UNIX socket transport module.[ 0.755142] RPC: Registeredudp transport module.[ 0.759778] RPC: Registeredtcp transport module.[ 0.764457] RPC: Registeredtcp NFSv4.1 backchannel transport module.[ 0.770913] NetWinderFloating Point Emulator V0.97 (double precision)[ 0.777431] PMU: registerednew PMU device of type 0[ 0.782586] cpuidle:phy_regs_save:0x388c3000[ 0.786779] Loaded driver forPL330 DMAC-0 s3c-pl330[ 0.791600] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32[ 0.797715] Loaded driver forPL330 DMAC-1 s3c-pl330[ 0.802592] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32[ 0.808732] Loaded driver forPL330 DMAC-2 s3c-pl330[ 0.813596] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32[ 0.827870] ashmem:initialized[ 0.841790] NTFS driver2.1.30 [Flags: R/W].[ 0.842290] ROMFS MTD (C)2007 Red Hat, Inc.[ 0.842557] msgmni has beenset to 773[ 0.843568] io scheduler noopregistered[ 0.843605] io schedulerdeadline registered[ 0.843691] io scheduler cfqregistered (default)[ 0.847873] start plist test[ 0.855573] end plist test[ 0.856373] s3cfb s3cfb: win2: pmem_start=0x39b96000[ 0.858384] s3cfb s3cfb:[fb2] dma: 0x39b96000, cpu: 0xe1000000, size: 0x0085c000[ 0.877673] Console:switching to colour frame buffer device 100x30[ 0.882740] FIMD src sclk =166750000[ 0.882812] s3cfb s3cfb:registered successfully[ 0.882852] Start display andshow logo[ 0.889619] s5pv210-uart.0:ttySAC0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10[ 0.894142] s5pv210-uart.1:ttySAC1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10[ 0.908902] s5pv210-uart.2:ttySAC2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10[ 0.918902] s5pv210-uart.3:ttySAC3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10[ 0.929372] leds initialized[ 0.929540] buttonsinitialized[ 0.929728] pwm initialized[ 0.929927] mini210-adc initialized[ 0.930221] backlightinitialized[ 0.931079] PA FB =0x39B96000, bits per pixel = 32[ 0.934343] screen width=800height=480 va=0xd9b96000 pa=0x39b96000[ 0.940602] xres_virtual =800, yres_virtual = 1440, xoffset = 0, yoffset = 0[ 0.947652] fb_size=8765440[ 0.950439] BackframeBuffer[0].VAddr=d9d0d000 PAddr=39d0d000 size=1536000[ 0.957273] BackframeBuffer[1].VAddr=d9e84000 PAddr=39e84000 size=1536000[ 0.964124] Video YBuffer[0].VAddr=d9ffb000 PAddr=39ffb000 size=921600[ 0.970703] Video YBuffer[1].VAddr=da0dc000 PAddr=3a0dc000 size=921600[ 0.977287] Video YBuffer[2].VAddr=da1bd000 PAddr=3a1bd000 size=921600[ 0.983874] Video UVBuffer[0].VAddr=da29e000 PAddr=3a29e000 size=462848[ 0.990548] Video UV Buffer[1].VAddr=da30f000PAddr=3a30f000 size=462848[ 0.997217] Video UVBuffer[2].VAddr=da380000 PAddr=3a380000 size=462848[ 1.010310] brd: moduleloaded[ 1.013588] loop: moduleloaded[ 1.015061] S3C NAND Driver,(c) 2008 Samsung Electronics[ 1.146647] S3C NAND Driveris using software ECC.[ 1.146728] NAND device:Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)[ 1.146801] NAND_ECC_NONEselected by board driver. This is not recommended !![ 1.146866] Creating 5 MTDpartitions on "s5pv210-nand":[ 1.150236]0x0000000c0000-0x000000100000 : "misc"[ 1.156037]0x000000100000-0x000000600000 : "recovery"[ 1.162057]0x000000600000-0x000000b00000 : "kernel"[ 1.166984]0x000000b00000-0x000000e00000 : "ramdisk"[ 1.171563]0x000000e00000-0x000020000000 : "system"[ 1.287223] PPP genericdriver version 2.4.2[ 1.287551] PPP DeflateCompression module registered[ 1.287596] PPP BSDCompression module registered[ 1.288082] PPP MPPECompression module registered[ 1.288126] NET: Registeredprotocol family 24[ 1.289588] tun: UniversalTUN/TAP device driver, 1.6[ 1.293128] tun: (C)1999-2004 Max Krasnyansky <[email]maxk@qualcomm.com[/email]>[ 1.299568] dm9000 EthernetDriver, V1.31[ 1.304502] eth0: dm9000a ate0838000,e083c00c IRQ 39 MAC: 08:90:00:a0:02:10 (platform data)[ 1.312003] usbcore:registered new interface driver dm9620[ 1.317373] sdhci: SecureDigital Host Controller Interface driver[ 1.323419] sdhci: Copyright(c)Pierre Ossman[ 1.327789] s3c-sdhcis3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)[ 1.334325] s3c-sdhcis3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)[ 1.341122] mmc0: no vmmcregulator found[ 1.345351] mmc0: SDHCIcontroller on samsung-hsmmc [s3c-sdhci.0] using ADMA[ 1.352140] s3c-sdhcis3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)[ 1.358675] s3c-sdhcis3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)[ 1.367462] mmc1: no vmmcregulator found[ 1.369740] mmc1: SDHCIcontroller on samsung-hsmmc [s3c-sdhci.1] using ADMA[ 1.376482] s3c-sdhcis3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)[ 1.383042] s3c-sdhcis3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)[ 1.389823] mmc2: no vmmcregulator found[ 1.397075] mmc2: SDHCIcontroller on samsung-hsmmc [s3c-sdhci.2] using ADMA[ 1.400845] s3c-sdhcis3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)[ 1.407381] s3c-sdhcis3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)[ 1.414159] mmc3: no vmmcregulator found[ 1.418382] mmc3: SDHCIcontroller on samsung-hsmmc [s3c-sdhci.3] using ADMA[ 1.425276] ehci_hcd: USB 2.0'Enhanced' Host Controller (EHCI) Driver[ 1.431867] s5p-ehcis5p-ehci: S5P EHCI Host Controller[ 1.437907] s5p-ehcis5p-ehci: new USB bus registered, assigned bus number 1[ 1.445967] s5p-ehcis5p-ehci: irq 87, io mem 0xec200000[ 1.458879] s5p-ehcis5p-ehci: USB 0.0 started, EHCI 1.00[ 1.459496] hub 1-0:1.0: USBhub found[ 1.459545] hub 1-0:1.0: 1port detected[ 1.462528] ohci_hcd: USB 1.1'Open' Host Controller (OHCI) Driver[ 1.468425] s5p-ohcis5p-ohci: EXYNOS OHCI Host Controller[ 1.473830] s5p-ohcis5p-ohci: new USB bus registered, assigned bus number 2[ 1.480802] s5p-ohcis5p-ohci: irq 87, io mem 0xec300000[ 1.543448] hub 2-0:1.0: USBhub found[ 1.543496] hub 2-0:1.0: 1port detected[ 1.544249] usbcore:registered new interface driver usbserial[ 1.544419] USB Serial supportregistered for generic[ 1.544599] usbcore:registered new interface driver usbserial_generic[ 1.546148] usbserial: USBSerial Driver core[ 1.550641] USB Serialsupport registered for aircable[ 1.555786] usbcore:registered new interface driver aircable[ 1.561499] USB Serialsupport registered for ark3116[ 1.566516] usbcore:registered new interface driver ark3116[ 1.572012] ark3116:v0.6:USBARK3116 serial/IrDA driver[ 1.577288] USB Serialsupport registered for Belkin / Peracom / GoHubs USB Serial Adapter[ 1.585572] usbcore:registered new interface driver belkin[ 1.591001] belkin_sa:v1.3:USB Belkin Serial converter driver[ 1.596890] USB Serialsupport registered for ch341-uart[ 1.602229] usbcore:registered new interface driver ch341[ 1.607664] USB Serialsupport registered for cp210x[ 1.612630] usbcore:registered new interface driver cp210x[ 1.618047] cp210x:v0.09:Silicon Labs CP210x RS232 serial adaptor driver[ 1.624900] USB Serial supportregistered for Reiner SCT Cyberjack USB card reader[ 1.632469] usbcore:registered new interface driver cyberjack[ 1.638152] cyberjack: v1.01Matthias Bruestle[ 1.642591] cyberjack: REINERSCT cyberJack pinpad/e-com USB Chipcard Reader Driver[ 1.650283] USB Serialsupport registered for DeLorme Earthmate USB[ 1.656536] USB Serialsupport registered for HID->COM RS232 Adapter[ 1.662909] USB Serialsupport registered for Nokia CA-42 V2 Adapter[ 1.670138] mmc0: new highspeed SD card at address 1234[ 1.674736] mmcblk0:mmc0:1234 SA02G 1.81 GiB [ 1.678928] usbcore:registered new interface driver cypress[ 1.684829] cypress_m8:v1.10:Cypress USB to Serial Driver[ 1.689945] mmcblk0: p1p2[ 1.693170] USB Serial supportregistered for Digi 2 port USB adapter[ 1.699438] USB Serialsupport registered for Digi 4 port USB adapter[ 1.705606] usbcore:registered new interface driver digi_acceleport[ 1.711801] digi_acceleport:v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver[ 1.722394] USB Serialsupport registered for Edgeport 2 port adapter[ 1.726534] USB Serialsupport registered for Edgeport 4 port adapter[ 1.732938] USB Serialsupport registered for Edgeport 8 port adapter[ 1.742486] USB Serialsupport registered for EPiC device[ 1.744754] usbcore:registered new interface driver io_edgeport[ 1.750612] io_edgeport:v2.7:Edgeport USB Serial Driver[ 1.757995] USB Serialsupport registered for Edgeport TI 1 port adapter[ 1.762665] USB Serialsupport registered for Edgeport TI 2 port adapter[ 1.772475] usbcore:registered new interface driver io_ti[ 1.774706] usb 1-1: new highspeed USB device number 2 using s5p-ehci[ 1.781203] io_ti:v0.7mode043006:Edgeport USB Serial Driver[ 1.789010] USB Serialsupport registered for empeg[ 1.791789] usbcore:registered new interface driver empeg[ 1.797144] empeg: v1.3:USBEmpeg Mark I/II Driver[ 1.805146] USB Serialsupport registered for FTDI USB Serial Device[ 1.808419] usbcore:registered new interface driver ftdi_sio[ 1.813940] ftdi_sio:v1.6.0:USB FTDI Serial Converters Driver[ 1.821857] USB Serialsupport registered for funsoft[ 1.824902] usbcore:registered new interface driver funsoft[ 1.830523] USB Serialsupport registered for Garmin GPS usb/tty[ 1.839667] usbcore:registered new interface driver garmin_gps[ 1.842253] garmin_gps:v0.36:garmin gps driver[ 1.847151] USB Serialsupport registered for hp4X[ 1.851681] usbcore:registered new interface driver hp4X[ 1.858964] hp4x: v1.00:HP4x(48/49) Generic Serial driver[ 1.862465] USB Serialsupport registered for PocketPC PDA[ 1.868023] usbcore:registered new interface driver ipaq[ 1.873254] ipaq: v1.0:USBPocketPC PDA driver[ 1.877743] USB Serialsupport registered for IPWireless converter[ 1.883962] usbcore:registered new interface driver ipwtty[ 1.890363] ipw:v0.4:IPWireless tty driver[ 1.895600] USB Serialsupport registered for IR Dongle[ 1.898833] usbcore:registered new interface driver ir-usb[ 1.904292] ir_usb: v0.5:USBIR Dongle driver[ 1.908693] USB Serialsupport registered for iuu_phoenix[ 1.914100] usbcore:registered new interface driver iuu_phoenix[ 1.919958] iuu_phoenix:v0.12:Infinity USB Unlimited Phoenix driver[ 1.926360] USB Serialsupport registered for Keyspan PDA[ 1.931774] USB Serialsupport registered for Keyspan PDA - (prerenumeration)[ 1.938954] USB Serial supportregistered for Xircom / Entregra PGS - (prerenumeration)[ 1.947391] hub 1-1:1.0: USBhub found[ 1.950503] usbcore:registered new interface driver keyspan_pda[ 1.956432] hub 1-1:1.0: 4ports detected[ 1.962430] keyspan_pda:v1.1:USB Keyspan PDA Converter driver[ 1.966376] USB Serialsupport registered for KL5KUSB105D / PalmConnect[ 1.972997] usbcore:registered new interface driver kl5kusb105d[ 1.978811] kl5kusb105:v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver[ 1.986389] USB Serialsupport registered for KOBIL USB smart card terminal[ 1.994551] usbcore:registered new interface driver kobil[ 2.000646] kobil_sct:21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)[ 2.006529] USB Serial supportregistered for MCT U232[ 2.011668] usbcore:registered new interface driver mct_u232[ 2.017268] mct_u232:z2.1:Magic Control Technology USB-RS232 converter driver[ 2.024537] USB Serialsupport registered for Moschip 2 port adapter[ 2.030786] mos7720:2.1:Moschip USB Serial Driver[ 2.035655] usbcore:registered new interface driver moschip7720[ 2.041634] USB Serialsupport registered for Moschip 7840/7820 USB Serial Driver[ 2.048984] mos7840:1.3.2:Moschip 7840/7820 USB Serial Driver[ 2.054899] usbcore:registered new interface driver mos7840[ 2.060529] USB Serialsupport registered for moto-modem[ 2.065814] usbcore:registered new interface driver moto-modem[ 2.071707] USB Serialsupport registered for navman[ 2.078666] usbcore:registered new interface driver navman[ 2.082173] USB Serialsupport registered for ZyXEL - omni.net lcd plus usb[ 2.089206] usbcore:registered new interface driver omninet[ 2.094687] omninet: v1.1:USBZyXEL omni.net LCD PLUS Driver[ 2.101450] USB Serialsupport registered for opticon[ 2.107433] usbcore:registered new interface driver opticon[ 2.111067] USB Serialsupport registered for GSM modem (1-port)[ 2.117133] usbcore:registered new interface driver option[ 2.122470] option:v0.7.2:USB Driver for GSM modems[ 2.127491] USB Serialsupport registered for oti6858[ 2.132556] usbcore:registered new interface driver oti6858[ 2.138168] USB Serialsupport registered for pl2303[ 2.143139] usbcore:registered new interface driver pl2303[ 2.148554] pl2303: ProlificPL2303 USB to serial adaptor driver[ 2.154616] USB Serialsupport registered for qcaux[ 2.159559] usbcore:registered new interface driver qcaux[ 2.164932] USB Serialsupport registered for Qualcomm USB modem[ 2.170946] usbcore:registered new interface driver qcserial[ 2.178541] safe_serial:v0.1:USB Safe Encapsulated Serial[ 2.182070] USB Serialsupport registered for safe_serial[ 2.187495] usbcore:registered new interface driver safe_serial[ 2.193449] USB Serialsupport registered for siemens_mpi[ 2.198842] usbcore:registered new interface driver siemens_mpi[ 2.205709] Driver forSiemens USB/MPI adapter[ 2.211107] Version 0.109/26/2005 Thomas [email]Hergenhahn@web.de[/email][url]http://libnodave.sf.net[/url][ 2.216832] USB Serialsupport registered for Sierra USB modem[ 2.222682] usbcore:registered new interface driver sierra[ 2.228104] sierra: v.1.7.16:USBDriver for Sierra Wireless USB modems[ 2.234684] USB Serialsupport registered for SPCP8x5[ 2.239754] usbcore:registered new interface driver spcp8x5[ 2.245260] spcp8x5:v0.10:SPCP8x5 USB to serial adaptor driver[ 2.251242] USB Serialsupport registered for Quatech SSU-100 USB to Serial Driver[ 2.258817] usbcore:registered new interface driver ssu100[ 2.264355] ssu100:v0.1:Quatech SSU-100 USB to Serial Driver[ 2.270075] USB Serialsupport registered for symbol[ 2.275007] usbcore:registered new interface driver symbol[ 2.280534] USB Serialsupport registered for TI USB 3410 1 port adapter[ 2.289237] USB Serialsupport registered for TI USB 5052 2 port adapter[ 2.293913] usbcore: registerednew interface driver ti_usb_3410_5052[ 2.300175] ti_usb_3410_5052:v0.10:TI USB 3410/5052 Serial Driver[ 2.306436] USB Serialsupport registered for Handspring Visor / Palm OS[ 2.313129] USB Serialsupport registered for Sony Clie 3.5[ 2.319692] USB Serialsupport registered for Sony Clie 5.0[ 2.326250] usbcore:registered new interface driver visor[ 2.329581] visor: USBHandSpring Visor / Palm OS driver[ 2.334942] USB Serialsupport registered for Connect Tech - WhiteHEAT - (prerenumeration)[ 2.343192] USB Serialsupport registered for Connect Tech - WhiteHEAT[ 2.349713] usbcore:registered new interface driver whiteheat[ 2.355406] whiteheat:v2.0:USB ConnectTech WhiteHEAT driver[ 2.361122] USB Serial supportregistered for vivopay-serial[ 2.366908] usbcore:registered new interface driver vivopay-serial[ 2.372907] vivopay_serial:v1.0:ViVOpay USB Serial Driver[ 2.378451] USB Serialsupport registered for zio[ 2.383159] usbcore:registered new interface driver zio[ 2.388318] Initializing USBMass Storage driver...[ 2.393322] usbcore:registered new interface driver usb-storage[ 2.401154] USB Mass Storagesupport registered.[ 2.403910] s3c-udc : S3C HSUSB Device Controller Driver, (c) 2008-2009 Samsung Electronics[ 2.403917] s3c-udc : version15 March 2009 (DMA Mode)[ 2.422751] android_usbgadget: Mass Storage Function, version: 2009/09/11[ 2.424135] android_usbgadget: Number of LUNs=1[ 2.428687] lun0: LUN:removable file: (no medium)[ 2.433920] android_usbgadget: android_usb ready[ 2.456983] Registered gadgetdriver 'android_usb'[ 2.457318] mousedev: PS/2mouse device common for all mice[ 2.457838] touchscreen-1wireinitialized[ 2.457875] backlight-1wire initialized[ 2.457963] setup_irq: ret =0[ 2.459361] PWM clock =66700000[ 2.462545]TCNT_FOR_SAMPLE_BIT = 3472, TCFG1 = 00000003[ 2.468370] input:fa_ts_input as /devices/virtual/input/input0[ 2.474307] ts-if initialized[ 2.477001] S3C24XX RTC, (c)2004,2006 Simtec Electronics[ 2.483239] s3c-rtcs3c64xx-rtc: rtc disabled, re-enabling[ 2.489642] s3c-rtcs3c64xx-rtc: rtc disabled, re-enabling[ 2.493015] s3c-rtcs3c64xx-rtc: rtc disabled, re-enabling[ 2.498468] s3c-rtcs3c64xx-rtc: rtc disabled, re-enabling[ 2.503921] s3c-rtcs3c64xx-rtc: rtc disabled, re-enabling[ 2.509757] using rtc device,s3c, for alarms[ 2.513563] s3c-rtcs3c64xx-rtc: rtc core: registered s3c as rtc0[ 2.519904] i2c /dev entriesdriver[ 2.523944] Linux videocapture interface: v2.00[ 2.527935] mfc_init:<6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics[ 2.527941][ 2.539053] S3C JPEG Driver,(c) 2007 Samsung Electronics[ 2.541403] JPEG driver forS5PV210[ 2.545498] i2c i2c-1:attached s5p_ddc into i2c adapter successfully[ 2.553461] S5PC11X HPDDriver, (c) 2010 Samsung Electronics[ 2.557280] S5PC11X CECDriver, (c) 2010 Samsung Electronics[ 2.563483] usbcore:registered new interface driver uvcvideo[ 2.568458] USB Video Classdriver (v1.1.0)[ 2.621037] input: mma7660 as/devices/platform/s3c2440-i2c.0/i2c-0/0-004c/input/input1[ 2.621330] mma7660 0-004c:MMA7660 device is probed successfully.[ 2.621510] i2c-core: driver[mma7660] using legacy suspend method[ 2.621562] i2c-core: driver[mma7660] using legacy resume method[ 2.625163] MMA7660 sensordriver registered.[ 2.629483] S3C2410 WatchdogTimer, (c) 2004 Simtec Electronics[ 2.635603] s3c2410-wdts3c2410-wdt: watchdog inactive, reset disabled, irq enabled[ 2.644000] device-mapper:uevent: version 1.0.3[ 2.648002] device-mapper:ioctl: 4.20.0-ioctl (2011-02-02) initialised:[email]dm-devel@redhat.com[/email][ 2.656067] Bluetooth: HCIUART driver ver 2.2[ 2.660426] Bluetooth: HCI H4protocol initialized[ 2.665298] Bluetooth: HCILLprotocol initialized[ 2.670025] cpuidle: usinggovernor ladder[ 2.674159] cpuidle: usinggovernor menu[ 2.684949] usbcore:registered new interface driver usbhid[ 2.685001] usbhid: USB HIDcore driver[ 2.688365] ALSA device list:[ 2.690501] Nosoundcards found.[ 2.693491] oprofile:hardware counters not available[ 2.698556] oprofile: usingtimer interrupt.[ 2.702893] GACT probabilityNOT on[ 2.706260] Mirror/redirectaction on[ 2.709884] u32 classifier[ 2.712554] Actions configured[ 2.715950] Netfiltermessages via NETLINK v0.30.[ 2.720713] nf_conntrackversion 0.5.0 (6185 buckets, 24740 max)[ 2.727495] ctnetlink v0.93:registering with nfnetlink.[ 2.731976] NF_TPROXY:Transparent proxy support initialized, version 4.1.0[ 2.738836] NF_TPROXY:Copyright (c) 2006-2007 BalaBit IT Ltd.[ 2.745015] xt_time: kerneltimezone is -0000[ 2.750551] ip_tables: (C)2000-2006 Netfilter Core Team[ 2.754415] arp_tables: (C)2002 David S. Miller[ 2.758913] TCP cubicregistered[ 2.763045] NET: Registeredprotocol family 10[ 2.771427] Mobile IPv6[ 2.771480] ip6_tables: (C)2000-2006 Netfilter Core Team[ 2.774521] IPv6 over IPv4tunneling driver[ 2.782877] NET: Registeredprotocol family 17[ 2.782943] NET: Registeredprotocol family 15[ 2.787370] Bluetooth: RFCOMMTTY layer initialized[ 2.792174] Bluetooth: RFCOMMsocket layer initialized[ 2.797238] Bluetooth: RFCOMMver 1.11[ 2.800960] Bluetooth: BNEP(Ethernet Emulation) ver 1.3[ 2.806246] Bluetooth: HIDP(Human Interface Emulation) ver 1.2[ 2.812372] NET: Registeredprotocol family 35[ 2.816698] Registering thedns_resolver key type[ 2.821278] VFP support v0.3:implementor 41 architecture 3 part 30 variant c rev 2[ 2.828868] ThumbEE CPUextension supported.[ 2.833278] s5pv210_cpufreq_init:S5PV210 cpu-freq driver[ 2.839130]regulator_init_complete: pd_mfc_supply: disabling[ 2.844246]regulator_init_complete: pd_tv_supply: disabling[ 2.849902] s3c-rtcs3c64xx-rtc: rtc disabled, re-enabling[ 2.855325] s3c-rtc s3c64xx-rtc:setting system clock to 2015-04-14 08:29:45 UTC (1429000185)[ 2.865393] FIMC0 registeredsuccessfully[ 2.868880] 4:TCNTB=00000d90, TCNTO=0000085f, TINT_CSTAT=0000020c[ 2.874199] FIMC1 registeredsuccessfully[ 2.879213] FIMC2 registeredsuccessfully[ 2.881997] S5PC1XX TVOUTDriver, (c) 2009 Samsung Electronics[ 2.888236] s5p-tvouts5p-tvout: hpd status is cable removed[ 2.918905] dm9000 dm9000:eth0: link down[ 2.919085]ADDRCONF(NETDEV_UP): eth0: link is not ready[ 3.178968]ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready[ 3.188994] dm9000 dm9000:eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1[ 3.194019] IP-Config:Complete:[ 3.194049] device=eth0, addr=202.117.177.100, mask=255.255.255.0, gw=202.117.177.90,[ 3.194123] host=202.117.177.100, domain=, nis-domain=(none),[ 3.194174] bootserver=202.117.177.90, rootserver=202.117.177.90, rootpath=[ 3.400217] VFS: Mounted root(nfs filesystem) on device 0:12.[ 3.400325] Freeing initmemory: 188K[ 3.624269] init (1):/proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.[ 4.452381] init: cannot open'/initlogo.rle'[ 7.959578] init: cannot find'/system/bin/zte_mf210_dial', disabling 'pppd_gprs'[ 8.717485] android_usb:already disabled[ 8.717809] adb_bind_config[ 8.718442] android_work: didnot send uevent (0 0 (null))[ 8.902699] init: untrackedpid 1462 exited[ 8.902837] init: untrackedpid 1463 exited[ 8.902889] init: untrackedpid 1464 exited[ 8.902940] init: untrackedpid 1465 exited[ 8.908497] adb_open/ # [ 9.367308] PVR_K:(Warning):SysFinalise: Version string: SGX540 S5PC110 [543,drivers/gpu/pvr/s5pc110/sysconfig.c][ 19.468877] nfs: server 202.117.177.90 notresponding, still trying
[ 此帖被24k纯铁在2015-04-14 16:37重新编辑 ]
