<6>s3c2410-sdi s3c2410-sdi: powered down.
<6>s3c2410-sdi s3c2410-sdi: initialisation done.
<6>s3c2410-sdi s3c2410-sdi: running at 0kHz (requested: 0kHz).
<6>s3c2410-sdi s3c2410-sdi: running at 98kHz (requested: 97kHz).
<6>s3c2410-sdi s3c2410-sdi: running at 98kHz (requested: 97kHz).
<6>s3c2410-sdi s3c2410-sdi: running at 98kHz (requested: 97kHz).
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>s3c2410-sdi s3c2410-sdi: running at 98kHz (requested: 97kHz).
<6>s3c2410-sdi s3c2410-sdi: running at 98kHz (requested: 97kHz).
<6>s3c2410-sdi s3c2410-sdi: running at 98kHz (requested: 97kHz).
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>Waiting for root device /dev/mmcblk0p2...
<6>s3c2410-sdi s3c2410-sdi: running at 98kHz (requested: 97kHz).
<6>s3c2410-sdi s3c2410-sdi: running at 25000kHz (requested: 25000kHz).
<6>s3c2410-sdi s3c2410-sdi: running at 25000kHz (requested: 25000kHz).
<6>mmc0: new SDHC card at address aaaa
<6>mmcblk0: mmc0:aaaa SD04G 3.69 GiB (ro)
<6> mmcblk0: p1 p2
VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2)
Please append a correct "root=" boot option; here are the available partitions:
1f00 16 mtdblock0 (driver?)
1f01 2048 mtdblock1 (driver?)
1f02 4096 mtdblock2 (driver?)
1f03 2048 mtdblock3 (driver?)
1f04 4096 mtdblock4 (driver?)
1f05 10240 mtdblock5 (driver?)
1f06 24576 mtdblock6 (driver?)
1f07 16384 mtdblock7 (driver?)
b300 3872256 mmcblk0 driver: mmcblk
b301 104391 mmcblk0p1
b302 3767242 mmcblk0p2
<0>Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)
